Installation Instructions

10
Anti-Tip Dimensions
WARNING
TIP OVER HAZARD
Appliance is top heavy and tips easily when not
completely installed. To avoid a hazard due to instability
of the appliance, it must be installed according to the
instructions including the anti-tip bracket
C
C
Cabinet
Rear
Floor
A
Cabinet
Opening
Dimension A = Cabinet opening minus the refrigerator height + 1-1/4" (3.2 cm)
Anti-tip Bracket
There are 12 hole locations on the anti-tip bracket. Of those
12, at least 4 places must be used.
NOTE: Number of fasteners must be suitable for load in order
to prevent tipping.
For example: wood screws into wall studs or masonry anchors if
attaching to stone, brick or concrete.