Specifications Sheet

10-1/8”
(25.7 cm)
36”
(91.4 cm)
**Access door opening
24-3/8”
(61.9 cm)
41-1/4”
(104.8 cm)
3”
(7.6 cm) min.
Electrical connection
for rotisserie motor
(position unit so that
the plug is always
accessible)
Electrical connection
for power supply cord
to be located on rear wall
with a maximum distance
of 2’ (61.0 cm) beneath
solid bottom support.
*Solid bottom support
Gas inlet and power cord
location area
5”
(12.7 cm)
Countertop typically requires
1/2” (1.3 cm) wide by 1” (2.5
cm) deep notch cutout on
each side of grill. This allows
grill CP to sit back properly in
the cutout.
1/2”
(1.3 cm)
1”
(2.5 cm)
6
42”
(106.7 cm)
29”
(73.7 cm)
39-1/2”
(100.3 cm)
17-1/4”
(43.8 cm)
10-1/2”
(26.7 cm)
54” Grill
Dimensions (42” & 54" W. Grill)
54”
(137.2 cm)
29”
(73.7 cm)z
51-1/2”
(130.8 cm)
17-1/4”
(43.8z cm)
10-1/2”
(26.7 cm)
42" W.
15
**Access Doors sold separately - refer to
access door installation instructions for
correct dimensions.
*IMPORTANT
Cabinet cutout must have a solid bottom
to support the full weight of the unit.
10-1/8”
(25.7 cm)
36”
(91.4 cm)
**Access door opening
24-3/8”
(61.9 cm)
53-1/4”
(135.3 cm)
3”
(7.6 cm) min.
Electrical connection
for rotisserie motor
(position unit so that
the plug is always
accessible)
Electrical connection
for power supply cord
to be located on rear wall
with a maximum distance
of 2’ (61.0 cm) beneath
solid bottom support.
*Solid bottom support
Gas inlet and power cord
location area
5”
(12.7 cm)
Countertop typically requires
1/2” (1.3 cm) wide by 1” (2.5
cm) deep notch cutout on
each side of grill. This allows
grill CP to sit back properly in
the cutout.
1/2”
(1.3 cm)
1”
(2.5 cm)
IMPORTANT
Cutout dimensions will be different when installing
next to combustible materials and using an INJK
insulated jacket kit (sold separately).
F60361B 0317
®
GAS 42” AND 54” W. ULTRA-PREMIUM 5 SERIES GRILLS
DESCRIPTION VGBQ54224/VGIQ54224 VGBQ55424/VGIQ55424
Overall Width 42” (106.7 cm) 54” (137.2 cm)
Overall Depth 29” (73.6 cm)
Cutout Width 41-1/4” (104.8 cm) 53-1/4” (135.3 cm)
Cutout Depth 24-3/8” (67.9 cm)
Cutout Height 10-1/8” (25.7 cm)
Gas Requirements Natural: standard residential 1/2" (1.3 cm) ID gas service line. LP/Propane: Equipped with high-capacity hose/regulator assembly for connection to standard 5 gal.,
20 lb. LP/Propane gas cylinder with a Type 1, QCC-1 connector or standard residential 1/2" (1.3 cm) ID gas service line.
Electrical Requirements 120VAC/60Hz – 2’ (61.0 cm) power supply cord with 3-prong grounded plug attached to grill
120VAC/60Hz – 2’ (61.0 cm) power supply cord with 2-prong grounded plug attached to rotisserie motor
Maximum Amp Usage 2.2 amps 3.0 amps
Grill Burner Rating 25,000 BTU NAT./22,500 BTU LP (7.3 kW NAT./6.5 kW LP)
Rotisserie Burner Rating 15,000 BTU NAT./13,500 BTU LP (4.4 kW NAT./4.0 kW LP)
TruSear™ Burner Rating – 25,000 NAT./22,500 LP – 25,000 NAT./22,500 LP
Approximate Shipping Weight 255 lb (116 kg) 330 lbs (149.7 kg)
Please do not prepare installation from brochure data only. See installation instructions for important clearance/installation information.
For detailed product information, model numbers, or to request a quote call 1-888-845-4641 or visit vikingrange.com
© 2017 Viking Range, LLC All rights reserved. Specifications subject to change without notice.
VIKING RANGE, LLC 111 FRONT STREET GREENWOOD, MISSISSIPPI 38930 USA
42”W. GAS GRILL 54”W. GAS GRILL
5 SERIES 42” AND 54”W. OUTDOOR GAS GRILLS
Viking Professional 5 Series – VGBQ/VGIQ
6
42”
(106.7 cm)
29”
(73.7 cm)
39-1/2”
(100.3 cm)
17-1/4”
(43.8 cm)
10-1/2”
(26.7 cm)
54” Grill
Dimensions (42” & 54" W. Grill)
54”
(137.2 cm)
29”
(73.7 cm)z
51-1/2”
(130.8 cm)
17-1/4”
(43.8z cm)
10-1/2”
(26.7 cm)
42" W.
IMPORTANT
Cutout dimensions will be different
when intalling next to combustible
materials and using an INJK
insulated jacket kit (sold separately).