Installation Guide

7
The bottom of a standard hood should be 30” (76.2
cm) min. to 36” (91.4 cm) max. above the countertop.
This would typically result in the bottom of the hood
being 66” (167.6 cm) to 72” (182.9 cm) above the floor.
Refer to the range hood installation instructions for
additional information. These dimensions provide for
safe and efficient operation of the hood.
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
24”
(61.0 cm)
or
27”
(38.6 cm)
30”
(76.2 cm)
6”
(15.2 cm)
Wood/Composite
Overlay
Wood/Composite
Overlay
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
0”
(
0 cm)
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
Wall Installation
Island Installation
Note: Minimum clearance for back wall is 0”
with backguard or high-shelf.
Important: This range comes standard with
an Island Trim. There must be a minimum of
6” (15.2 cm) clearance from rear of range to a
combustible wall. Clearances from non-
combustible materials are not part of the
ANSI Z21.1 scope and are not certified by CSA.
Clearances to non-combustible materials
must be approved by the authority having
jurisdiction.
Clearance Dimensions (Wood/Composite Overlay)