User Manual

14
|
SIDE BURNER ACCESSORY CARE & USE/INSTALLATION
TE
S
TIN
G
THE IN
S
TALLATI
ON
Before turning the gas su
pp
ly on, check for
p
ro
p
er installa-
tion using the following test
:
1. Plug the transformer back into the receptacle
.
2
. Pus
h
in t
h
e gas contro
l
k
no
b
on your accessory an
d
watch the igniter. It should glow bright and steady
.
3
. Turn on the light switch on the grill. Both the grill and
the grill accessory lights should operate together. This
indicates a proper assembly
.
Turn the gas on to all appliances.
4. Per
f
orm a leak test i
f
you have not done so since
plumbing the unit
.
5. Check all burners for proper ignition. Refer to the Light
-
ing Instructions
f
or Side Burners.
LEAK TE
S
TIN
G
Lea
k
Test Pro
c
e
d
ure
:
1. Create a soa
p
y solution of 1
p
art soa
p
and 3
p
arts
water.
2
. Confi rm that all control knobs are in the off position.
3
. Turn on the fuel supply. For natural gas, turn the valve
handle 1/4 turn to align with the gas fl ow.
4. For LP, turn the cylinder valve knob counter clockwise
one full rotation.
5
. Apply the soap solution generously by paint brush o
r
squirt bottle on all connections and fi ttings.
6
. If bubbles appear to “grow” on any of the connections,
you have a gas leak. IMMEDIATELY turn off the gas
supply.
FIXIN
G
A
G
A
S
LEA
K
DANGER!
To prevent fi re or explosion hazard, DO NOT smoke
or allow any potential source of ignition (sparks,
electrical arcing, etc) in the area while performing a
l
ea
k
test
. L
ea
k
tests
s
h
ou
l
d
be
co
n
ducted
outdoo
r
s
only. Never conduct a leak test using fi re or fl ame.
1
. Shut off the gas suppl
y
2.
T
urn all grill controls to the “ON” position to purge the
grill o
f
any gas build-up, then turn the controls bac
k
“
OFF”.
3
. Wash off the soapy solution with cold water and dry.
4.
T
ighten the loose joint, or replace the
f
aulty part with
manufacturer-recommended replacement parts.
5. DO NOT attempt to repair the LP cylinder valve i
f
it is
damaged. The only way to sa
f
ely resolve a damaged
cylinder is to REPLACE IT.
6. Repeat the leak test to ensure that no leaks are present
.