Technical data

2. SYSTEM STRUCTURE

The Enigma IP2 monitoring receiver is ideal and cost-effective solution to build-up a

monitoring station, where transmission is sent only through IP / GPRS channel. Device

has compact size and excellent parameter setting possibilities. The incoming IP

communication might be monitored according to client accounts. It provides prominent

protection level for the reliable and secure operation. The card version device can be be

built into the Enigma II base unit. With combination of a suitable monitoring software it

guarantees not only reliable signal transmission, but also easy to use operator interface.

3. FIRST STEPS

Please unpack the device carefully and please check is there any damage on that

caused by transport. If there is any obvious damage do not switch on the device, please

call the distributor. The basic package contains the following units:

• ENIGMA IP2 monitoring receiver

• USB cable for PC connection

• 12 VDC power supply set

• Installer Manual

Before mounting the device to its operation environment, receiver test is recommended.