Technical data

6. ENIGMA IP2 TESTING

When all setting is finished it is possible to test ENIGMA IP2 unit. Testing is also useful

to test data sending from an external installation place. The testing software in the given

local network can help a lot to check monitoring transmission and find the reason of

possible problems. For test please use ipt.exe software in the following way:

1. Enter the IP address or Domain name of the monitoring station.

2. Set the ports for communication with monitoring station (Receive Port = Monitoring

transmission port; Shell (Telnet) Port = Remote programming port; Web Server Port

= Event list access through web browser port).

3. After click to Test button it can be seen that test is successful (PASS) or not (FAIL).

4. If you want you can change the program settings in Options part:

- Enable TCP Test Report = TCP connection test with test message;

- Enable UDP Test Report = UDP connection with test message;

- Invisible TCP/UDP Test = Test message can't be seen on receiver;

- Enable AES Crypted Test Report / AES Key = Test of AES encryption function.