Use and Care Manual

Setting the Temperature
The temperature display will show the current temperature inside the unit. To set a temperature,
press and hold the button till the display shows “H1” and the displayed temperature starts to
flash. Once the temperature display starts to flash, use the or buttons to select your
desired temperature.
For wine to stay fresh up to 45 days, bottles must be closed and unit preservation system must
be properly sealed to prevent deterioration. Keep wine at proper temperature in unit.
LED Light
The LED light can be switched on or off by pressing the button.
CARE AND MAINTENANCE
IMPORTANT: Always unplug your wine dispenser before cleaning or performing maintenance.
Never use harsh cleansers or scouring pads to clean any part of the wine dispenser.
Cleaning
To clean the stopper dispenser and solenoid valve:
1. Fill a bottle with clean warm water and place the stopper-dispenser onto the bottle.
2. Press and hold the button to begin dispensing the warm water.
3. To start the automatic cleaning setting, press the portion button 5 times and then hold
until the display begins to flash and shows “CL”.
4. Continue to dispense and flush the system until dry argon comes from the spout.
11
7 3 2 S o u t h R a c e t r a c k R o a d , H e n d e r s o n , N e v a d a 890 1 5
i n f o @ v i n o t e m p . c o m