Technical data

7
GB
The door can be changed from right-hinged to left-hinged and vice versa as follows:
Reversible door
1. Lay the appliance on its back and loosen
the upper hinge.
2. Remove the upper hinge.
4. Carefully remove the covers on the
side of the plinth using a fl at-headed
screwdriver.
5. Pull up the hinge pin...
...and fi t it on the opposite side.
8. Click the covers into place on the plinth
sides on the opposite side.
6. Unscrew the lock pin using a fl at-headed
screwdriver.
9. Fit the door onto the bottom pin, fi t the
top hinge and tighten securely.
3. Rotate the glass door through 180° (on
V 150 SG2E, pull the handle to loosen
it on the inside from beneath the sealing
strip).
7. When the lock pin has been loosened
completely, pull it up together with the
lock cylinder and refi t on opposite side.
10. After reversing the door, it is important to check that the sealing strip provides a tight seal all the way round. If it does not, carefully heat
the strip all the way round using a hair dryer. Then ease the strip outwards slightly so that it forms a tight seal against the cabinet. Be
careful not to heat the strip so much that it melts!