ORE; No ooY, ,NNov ,,oN 22" 1080p LCD Television LC22VX60PB AIR (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air" mode. Please refer to page 19 of the owner's manual for the details of this menu. FOR QUESTIONS Please Please call: OR TECHNICAL SUPPORT 1-877- 777-14 do not return this TV to the 28 store.
Contents Contents Caution Safety Information 2 3 Unit and Accessories Product Feature 4 4 Introduction 1. Front View 2. Rear View 3. Remote Control 5-8 5 6 7-8 Connection 9-11 Basic Operation 12-13 OSD Menu 1. Picture menu 2. Audio menu 3. Time menu 14-20 14 15 16 17 18 19-20 4. Setup menu 5. Lock menu 6.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information To ensure reliable and safe operation of this equipment, please read carefully instructions in this user guide, especially the safety information below. Electrical all the safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor • To prevent overload, don't share the same mains supply socket with too many other items of equipment. -Do not place any connecting wires where they may be stepped on or tripped over.
Unit and Accessories and Product Feature Unit and Accessories oo TV set User's Manual User's manual Remote control Batteries: 2xAA Product Feature - Inputs: RF, VIDEO, VGA, YPbPr, HDMI Audio Input: AVAudio R/L, PC Audio Support TV mode: NTSC-M, ATSC Search TV: Auto/Manual - Auto-shutting down - Program exchange and edit 4 Mains Cable
Introduction Introduction 1. Front View 0 U CH- ooooo' CH+ VOL- VOL+ TV/AV P E o Led Indicator {ioo ======== 0 Remote Control window (Keep clear) 1. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off.
Introduction 2. Rear View m °I i° o Io 8 SWITCH 1 AC POWER HDMI I 2 VGA 3 PC Y Pb IN Pr VIDEO L R RF audi°inl I I , IAUdi°inl 4 5 6 7 1. 2. 3. 4. 5. 6. AC POWER IN: Connect to an earth 100-240V,50-60Hz AC outlet with the Power Cable. HDMI: Connect it to the HDMI of DVD or other equipment. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC. PC AUDIO: Connect it to the audio output terminal of PC.
Introduction 3. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AA size batteries observing the polarity markings inside the battery compartment. Don't mix different types or used batteries with new ones. 3. Close the cover. Batteries shall not be exposed - The remote control should be operated IR receive at the front of the LCD TV. - Used batteries should be disposed to excessive heat such as sunshine within 30 feet(7m) or fire.
Connection Connection Power Cord Connection m °1I° o Io IDDB DIIDDB DIIDDB D - Connect the power cord correctly as shown with the mains cable, and turn the switch (Page 6) on. - When you connect the power, the TV set comes into standby mode and the LED indicator (Page 5) lights red.
Connection AV Input Connection Note: All cables shown are not included HDMI VGA with the TV. PC Y audio in Pb VIDEO Pr R RCA Video Cable RCAAudio h_==:= L__ YPbPr RF _:o_ Cable DVD or VCR Connection Note: All cables shown are not included with the TV. /L_ _ _.
Connection HDMI Connection Note: All cables shown are not included with the TV. HDMI VGA PC Y audio in Pb Pr VIDEO L R Audio in RF DVDorVCR PC Connection Note: All cables HDMI shown are not included with the TV. VGA PC Y Pb Pr VIDEO L R Audio in RF If using a sound card, adjust the PC sound as required. Set the video resolution of your PC to 1024x768,60Hz on its original monitor.
Basic O_eration Basic Operation Power on/off 1. Connect to the power with a power code, and turn on the switch(page9). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press TV/AV button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or/k / V button on remote control to select the input source, press OK button on the remote control to enter.
Use < / > button to select the main menu, and press V button to enter the submenu. In the submenu, use A / V button to select the function item, and you could: adjust ("Contrast" item in Picture menu for example) with < / > button; select ("Picture Mode" item in Picture menu for example) with < / > button; enter the submenu ("Close Caption" item in Setup menu for example) with > button. * (Press MENU button to return to the upper menu.) * (Press EXIT button to exit the menu display.
OSD Menu OSD Menu 1. Picture menu Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions Brightness: Adjust brightness of the picture. Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural. Sharpness: Set the amount of fine detail in the picture. Color Temp.
OSD Menu 2. Audio menu Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. Audio Language: Select audio language.
OSD Menu 3. Time menu Sleep timer: You may set the automatic deactivate this function. shutdown timer choosing Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Daylight Saving Time: Select between On and Off. Clock: Modify date and time. 16 from 5 to 240 minutes, Central and Mountain.
OSD Menu 4. Setup menu Menu Language: Select Transparency: Turn on Zoom Mode: Select the 4:3, 4:3 zoom. Noise reduction: Select OSD menu language. or off the transparency menu function. zoom mode between 16:9, 16:9 zoom, the noise reduction mode between Strong, Off, Weak and Middle. PC SETUP: If the video input signal comes from your PC, you may adjust the V-Position, H-Position, Frequency, Phase or even perform an Auto adjustment. Closed Caption:.
OSD Menu 5. Lock menu You must enter the password You may modify the following to gain access to the Lock menu. The default password options: is 0000. Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below don't work. This option menu allows you to lock any TV channel or adjust the Movie rating filter.
OSD Menu 6. Channel menu COLOR TV BROADCASTING AZORES(PORTUGAL) BALKANS(KOSOVO, BOSNIA) BELGIUM/GERMANY/ITALY IRAQ NETHERLANDS/NORWAY B/G PAL B/G PAL B/G KUWAIT/TURKEY/JORDAN KINGDOM CZECH/HUNGARY/POLAND RUSSIA U.S.A./JAPAN/KOREA/GUAM Channel B PAL B/G B PAL B/G PAL I PAL D/K SECAM D/K NTSC M NO, Channel "_ If you select "Air" as input signal in Antenna item, you can press > button to search the channels automatically. The receivable channels will be stored automatically.
OSD Menu Show/Hide: Allow you to show or hide the channels. Use A / V button to highlight the desired item, then press OK button to show or hide the highlighted channel. Channel No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel. Press < / > button to select the position of the table, and press A / V button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, 20 Bad.
Sim_le Troubleshootin_ Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect No power - Check all connections your helpline for assistance. to the TV. - Press either the power button or the Standby button on the Remote control.
Technical ,S_ec_cations Technical Specifications 21.6 inch(diagonal) 300 cd/m 2 1000:1 1920x1080 1 1 1 1 1 1 1 AC100-240V 50/60Hz 60W The cabinet design and electronics improving the performance.
VIORE TMLIMITED WARRANTY FLAT PANEL TELEVISION This VlORE brand Product, as supplied and distributed by VlORE and delivered new in the original carton to the original purchaser is warranted by VlORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.
