® NO ONE DARES COME CLOSE ® O W N E R’ S G UIDE M O D E L 3606V
Congratulations Congratulations on the purchase of your state-of-the-art security system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. Additional Guide Information Only basic commands, features and essential information are covered in this compact guide.
Optional Remote Controls A choice of two optional remote controls with additional features is also available for use with your system. These remote control choices are: LED 2-way (P/N 7856) and LCD 2-way (P/N 7756). See your authorized dealer for purchasing details. Once purchased, please go online to our website (listed on the back cover) and use system model number 3806 or 3706 respectively to search for the appropriate owner’s guide, which provides instructions on how to use these remote controls.
Contents Remote Control ................................................................................................... 3 Control Center .................................................................................................... 3 Using your System ............................................................................................... 4 Commanding the system ....................................................................... 4 Performing Commands ....................................
Remote Control Feature Description Internal Antenna Used for transmitting information Transmit LED Active when transmitting information Command buttons (4) Used to perform arming, disarming, and auxiliary channel commands AUX Function button Used to access function levels for commands, configuration menus for programming and Car Selection Control Center LED Control Center Button The Control Center, typically located on the upper part of the front windshield.
Using your System Commanding the system Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used security and remote start features while Advanced commands control more specialized features. Confirmations for Basic or Advanced commands are indicated by siren chirps and parking light flashes.
Remote Control Command table Level Direct Access Button x1 LEVEL 1 Arm/Lock Silent Arm LEVEL 2 x3 LEVEL 3 x4 LEVEL 4 Sensor Sensor Silent Full Silent Bypass Arm Arm Silent Disarm Remote Valet Car Finder AUX 1 AUX 2 AUX 3 (Panic) Disarm/Unlock x2 Remote Start*/ Aux 1/4** AUX Aux/Trunk AUX 4 Advance Level, Enter programming (8 sec) * Available only with optional Remote Start module installation ** This button can command either Aux 1 or Aux 4 if turned on by an authorized Directed
Basic Commands (Direct Access) Arm Press and release The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. If Valet mode* is On, the doors lock without siren chirps, the alarm is disabled. Exit Valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the control center LED generates a Trigger Zone Fault report*.
Remote Start/Aux 1/Aux 4 Press and release Remote Start ** Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On, or the engine and parking lights turn Off accordingly. AUX1/AUX4 *** Activates (or if on, deactivates) the aux 1or aux 4 output. AUX/Trunk Press and hold AUX The Trunk opens (if connected) when this button is pressed for 2 seconds. * See online guide for details. ** Available only with optional Remote Start module installation.
Battery Information The remote controls are powered by 1 coin cell battery (CR-2032) that can be purchased at most retailers. When the battery begins to weaken, the operating range will be reduced. Battery Disposal Directed cares about the environment. If you need to dispose of the battery, please do so in accordance with your municipal requirements for battery disposal.
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Control Center To satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device complies with the Industry Canada Radio Standards Specification RSS 210.
Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-7530600. Interference All radio devices are subject to interference which could affect proper performance.
Limited lifetime consumer warranty Directed Electronics.
ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.
The company behind Viper® Auto Security Systems is Directed. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Quality Directed products are sold and serviced throughout North America and around the world. Call (800) 876-0800 for more information about our products and services. © 2013 Directed. All rights reserved.
® NO ONE DARES COME CLOSE ® O W N E R’ S G UIDE M O D E L 3606V
Congratulations Congratulations on the purchase of your state-of-the-art security system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system.
Replacement Remote Controls Please see your authorized dealer or visit us at www.directedstore. com to order additional remote controls , or the optional LED and LCD remote controls. Remote control part numbers are found on the back of the device. Your Warranty Your system comes with a warranty. The warranty terms are detailed at the end of this guide. Make sure that you receive the proof of purchase from your dealer, indicating the product was installed by an authorized Directed dealer.
Contents Getting Started.................................................................................................... 3 Keys to using this manual...................................................................... 3 Remote Control ................................................................................................... 4 Control Center .................................................................................................... 4 Using your System ..................................
Auto Re-arming.................................................................................. 19 Valet Mode ....................................................................................... 20 Power Save....................................................................................... 20 Rapid Resume ................................................................................... 20 Car Select .........................................................................................
Getting Started Keys to using this manual Specific actions (in bold type) and style conventions are used consistently throughout this manual, they are as follows: • • • • Press: implies pushing in and releasing a button. Hold: is used after Press actions when a button needs to be held in position for an extended period of time, typically several seconds. Italicized words denote section/sub headings in this guide and can be located through the table of contents.
Remote Control Feature Description Internal Antenna Used for transmitting information Transmit LED Active when transmitting information Command buttons (4) Used to perform arming, disarming, and auxiliary channel commands AUX Function button Used to access function levels for commands, configuration menus for programming and Car Selection Control Center LED Control Center Button The Control Center, typically located on the upper part of the front windshield.
Using your System Commanding the system Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used security and remote start features while Advanced commands control more specialized features. Confirmations for Basic or Advanced commands are indicated by siren chirps and parking light flashes.
Remote Control Command table Level Direct Access Button x1 LEVEL 1 Arm/Lock Silent Arm x3 LEVEL 2 LEVEL 3 x4 LEVEL 4 Sensor Sensor Silent Full Silent Bypass Arm Arm Silent Disarm Remote Valet Car Finder AUX 1 AUX 2 AUX 3 (Panic) Disarm/Unlock x2 Remote Start*/ Aux 1/4** AUX Aux/Trunk AUX 4 Advance Level, Enter programming (8 sec) * Available only with optional Remote Start module installation ** This button can command either Aux 1 or Aux 4 if turned on by an authorized Directed
Basic Commands (Direct Access) Arm Press and release The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. If Valet mode* is On, the doors lock without siren chirps, the alarm is disabled. Exit Valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the control center LED generates a Trigger Zone Fault report**.
Remote Start/Aux 1/Aux 4 Press and release Remote Start *** Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On, or the engine and parking lights turn Off accordingly. AUX1/AUX4 **** Activates (or if on, deactivates) the aux 1or aux 4 output.. AUX/Trunk Press and hold AUX The Trunk opens (if connected) when this button is pressed for 2 seconds. * See “Remote and System Operations” on page 19. ** See “Alarm Features” on page 16 for more details.
Advanced Commands: (Level 1) Press and release the button one time first, before pressing one of the following command buttons. The transmit LED illuminates in sets of single flashes to indicate Level 1. Silent Arm Press and release The alarm arms, doors lock (if connected), and the parking lights flash once. Silent Disarm Press and release The alarm disarms, doors unlock (if connected), and the parking lights flash twice.
Advanced Commands: (Level 2) Press and release the button two times first, before pressing one of the following command buttons. The transmit LED illuminates in sets of double flashes to indicate Level 2. Sensor Bypass Press and release Performing the Sensor Bypass command will incrementally bypass sensor operations and be confirmed as follows: • Warn-away bypass: The Parking lights flash two times. Sensors will be activated for Full Trigger levels of impact only.
Advanced Commands: (Level 3) Press and release the button three times first, before pressing one of the following command buttons. The transmit LED illuminates in sets of triple flashes to indicate Level 3. Sensor Silent Arm* Press and release The alarm arms, doors lock, and the siren chirps and parking lights flash three times. Car finder Press and release The siren emits one long chirp and the parking lights flash for 10 seconds.
Advanced Commands: (Level 4) Press and release the button four times first, before pressing one of the following command buttons. The transmit LED illuminates in sets of quadruple flashes to indicate Level 4. Full Silent Arm* Press and release The alarm arms, doors lock, and the siren chirps and parking lights flash four times. AUX 4 Press and release AUX Activates (or if On, deactivates) the Aux 4 output. * See “Alarm Features” on page 16 for more details. 12 © 2013 Directed. All rights reserved.
Remote Control Configuration The remote controls have operations that can be configured to a user’s personal preferences. The following instruction directs you through the available programming options for both remote controls. Remote Programming To Enter Programming: Press and hold the button for eight seconds, the transmit LED turns on to indicate the Main Menu is accessed. To Exit Programming: Press and release the button once then press and hold the button again until the transmit LED shuts off.
8. 9. Press the button. Wait several seconds as the remote generates a security encryption and sends it to the Control Center. The siren chirps to indicate Pairing is complete. If pairing is not successful press and release the button once and then repeat steps 7 and 8. Pairing will exit if: • Step 7 is not completed within 60 seconds • The doors are closed • The ignition is turned off.
Keypad Lock Options: Off, Auto When Off, the buttons do not lock and always perform a command when pressed. When set to Auto, the remote buttons lock after a 20 second lapse between button presses to prevent unintentional operations. To unlock the buttons, press the button followed by the button. Note If a button is pressed when locked, a fault tone plays as an alert. To unlock the buttons, press the button followed by the button, tones are emitted to confirm unlocking.
Alarm Features Normal Arm Protection Status LED: The Control Center Status LED flashes as a visual indicator that your vehicle’s security system is active. Starter Kill: The Failsafe starter kill relay prevents the engine from starting Note May require additional parts and installation Sensor triggers: The shock sensor can distinguish minor impacts from major impacts to the vehicle exterior. Minor impacts causes the system to emit a Warn-away output.
Sensor Warn-away output When the system sensors detect a Warn-away trigger the siren chirps and parking lights flash for 3 seconds. Full Trigger output An alarm Full Trigger will sound the siren and flash the parking lights for 30 seconds. Emergency Override The following procedure disarms the system when a programmed remote is not available. Number of presses__________ 1. Turn the ignition On. 2. Press the control button on the Control Center the correct number of times (the default is one press). 3.
Alarm Report If the alarm was triggered while armed, it will be reported when the alarm is disarmed via siren chirps, parking light and control center LED flashes. The siren chirps four times (or five times if NPC On*), the parking lights flash three times, and the control center LED flashes in groups to indicate the last two zones that were triggered (see Table of Zones). The report output will repeat for each disarm operation until the ignition is turned on. * See Nuisance Prevention (NPC) for more details.
Remote and System Operations Passive Arming* Park and exit the vehicle, after the doors are closed the Passive arming countdown begins. The led flashes quickly and upon reaching 20 seconds the siren then chirps once. At 30 seconds the system arms itself. Anytime before the system arms you can re-enter the vehicle or open the trunk to load or unload items and, after closing passive arming resumes.
Valet Mode Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the control button. When entered, the alarm functions are defeated while the convenience features still operate normally. Use 1. 2. 3. the following steps to manually enter and exit Valet Mode: Turn the ignition switch On and then Off Immediately press and release the control button once The control center LED turns On when entering and Off when exiting.
System Expansion Options Controlling two vehicles (Car Select) The remote controls can control systems in two different vehicles saving the need for multiple remote controls. This feature also allows for customized system configurations on each vehicle that has more than one driver. See Owner Recognition for details. Owner recognition * The system can be configured to recognize the remote used when disarming and change selected features to match the remote users preferences.
Auxiliary Channels The auxiliary channel outputs of this system can activate many of the convenience features found in today’s vehicles. The system installer can clarify if any of the following listed features are compatible with your vehicle. • • • • • • • • Trunk Release Windows open/close Left Sliding door open/close Right Sliding door open/close Rear Hatch open/close Sunroof open/close Audio System Headlights * These features must be turned on by an authorized Directed dealer. 22 © 2013 Directed.
Battery Information The remote controls are powered by 1 coin cell battery (CR-2032) that can be purchased at most retailers. When the battery begins to weaken, the operating range will be reduced. The information and precautions in this section can help maximize your battery’s life and usage in providing you with many years of trouble free operation. Low Battery Alerts When disarming the system using a remote with a low battery the siren will emit one additional chirp as an alert.
Patent Information This product is covered by one or more of the following United States patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783 Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484 Other patents pending. 24 © 2013 Directed. All rights reserved.
Glossary of Terms Document Terminology Control Module The “brain” of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system’s functions. Remote Control A hand-held, remote control which operates the various functions of your system. Control Center The control center contains the system’s radio-frequency antenna, the control button, and the Status LED.
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Control Center To satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device complies with the Industry Canada Radio Standards Specification RSS 210.
Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-7530600. Interference All radio devices are subject to interference which could affect proper performance.
Limited lifetime consumer warranty Directed Electronics.
ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.
The company behind Viper® Auto Security Systems is Directed. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Quality Directed products are sold and serviced throughout North America and around the world. Call (800) 876-0800 for more information about our products and services. © 2013 Directed. All rights reserved.
Guide Translations Quick Reference Install Guide For a Spanish or French version of the Installation Guide, please download it from www.directechs.com under “Resources”. Responder LCD, LED & 1-way systems Traducción de los manuales: Para obtener una versión en Español o Francés del Manual de Instalación, descárguela de www.directechs.com bajo el título “Recursos” (“Resources”).
Programming System Features The System Features Learn Routine dictates how the unit operates. It is possible to access and change most of the feature settings using the control center button. 1. 2. 3. 4. 5. 6. Open a door. Turn the ignition on, then off. Select a Menu. Press and hold the control center button. The number of siren chirps indicates the menu number. 1 chirp indicates menu 1, 2 chirps - menu 2. When the desired menu chirps are heard, release the control center button. Select a Feature.
Your new system is compat ible with SMART START.™ Start, control and monitor your car from virtually anywhere with your smartpho ne. Ask your dealer for more information .
What can SMARTSTART ™ do for you? Remote Start Roadside Assistance Whether it's blazing hot or freezing cold outside. Start your vehicle from your smartphone and make the temperature just right. Locked out? Dead battery? Need a tow? SMARTSTART's got your back . Free 24/7/365 roadside assistance comes with all SMARTSTART SECURE service plans. SmartSchedule Never remember? SMARTSTART can look at your local weather and time to remind you that it is time to start your vehicle.
