Installation guide

1. Aux/Trunk Icon Type: sets the name to be displayed in the Text Field when the Aux/Trunk output is acti-

vated/de-activated

2. Aux 1 Timed Output: sets the output duration in 1 second intervals up to 90 seconds for Aux 1

3. Aux 1 Icon Type: sets the name to be displayed in the Text Field when the Aux 1 output is activated/

de-activated

4. Aux 2 Timed Output: sets the Aux 2 “Timed” output in 1 second intervals up to 90 seconds

5. Aux 2 Icon Type: sets the name to be displayed in the Text Field when the Aux 2 output is activated/

de-activated

6. Aux 3 Timed Output: sets the Aux 3 “Timed” output in 1 second intervals up to 90 seconds

7. Aux 3 Icon Type: sets the name to be displayed in the Text Field when the Aux 3 output is activated/

de-activated

8. Aux 4 Timed Output: sets the Aux 4 “Timed” output in 1 second intervals up to 90 seconds

9. Diesel Start Delay Timer: sets the delay before engine crank in 1 second intervals up to 90 seconds for

diesel engine vehicles

10. Timer Mode Runtime: sets the duration of runtime when the engine is started by the Timer Mode and Smart

Start features

11. Timer mode Starts: sets the number of times the engine will be started by the Timer Mode and Smart Start

features

12. Timer mode Intervals: sets the number of hours between engine starts by the Timer Mode and Smart Start

features

13. Smart Start Low Temperature: sets the low temperature threshold required for Smart Start to start the

engine

14. Smart Start High Temperature: sets the high temperature threshold required for Smart Start to start the

engine

15. Smart Start Low battery (Volts): sets the low battery level threshold required for Smart Start to start the

engine

16. Starter Release Fine Tune: adds or subtracts crank time in Tachometer mode in order to overcome engine

types that short crank or over-crank on the ﬁrst start attempt

17. Feature Programming: locks and unlocks the user’s ability to enter the feature menus and manually

change the main unit programming using the Control Center

18. Transmitter Programming: locks and unlocks the user’s ability to enter the remote control/Reset menu and

manually change any functions using the Control Center

19. Remote Start Runtime: sets the duration of runtime when the engine is started by remote command

20. VirtualTach Fine tune: adds or subtracts crank time in VirtualTach mode in order to overcome engine types

that short crank or over-crank on the ﬁrst start attempt