Specifications

SIGNAL DYNAMICS
BACK OFF BRAKE LIGHT
SIGNAL MODULE
• This compact, solid-state electronic module converts your
ordinary brake light into an attention-getting,
visual-alerting device
• Module causes 3 short flashes, stays on for 3.5 seconds, then
repeats the cycle for as long as the brakes are applied
• Please note: May not work on bikes that use L.E.D. lighting
• Specifications: 12V DC, max. capacity 10A, sealed weather-
resistant heat sink case, 2-1/4” L x 5/8” H x 1-5/8” W
48-1000
$37.95
SIGNAL DYNAMICS
BACK OFF XP/BRAKE LIGHT
SIGNAL MODULE
• Compact, solid-state electronic module converts brake lights
into 2 choices of visual alerting signals when brakes
are applied
• Mode one emits 3 short flashes followed by one long flash (3.5
seconds); Repeats as long as brakes are applied
• Mode 2 emits 5 short flashes followed by a steady on light;
light remains on until brakes are released
• Specifications: 12V DC, max. capacity 10A, sealed weather-
resistant heat sink case, 2-1/4” L x 5/8” H x 1-5/8” W
48-1001
$42.95
SIGNAL DYNAMICS
BACK OFF WIG WAG
• Compact solid-state electronic module converts brake lights into
2 choices of visual alerting signals
• Mode one emits 4 quick, alternating flashes of left and right
brake light followed by 3 short flashes and one long flash of both
brake lights; pattern of 3 short flashes and one long flash of both
lights repeats as long as brakes are applied
• Mode 2 emits 4 quick, alternating flashes of the left and right
brake lights followed by 3 short flashes of both brake lights and
then a steady on; brake lights remain on until brakes are released
• Designed for motorcycles equipped with 2 brake lights located
side-by-side
• Specifications: 12V DC, max. capacity 10A, sealed weather-
resistant heat sink case, 2-1/4” L x 5/8” H x 1-5/8” W
48-1003 $42.95
SIGNAL DYNAMICS
PLUG & PLAY HEADLIGHT MODULE
• Now there is no need to cut or splice wires in order to install a
headlight module on your bike
• With the Plug & Play Headlight Module, simply select which
harness is needed for your bike, then plug it all together
Note: Harness sold separately. Please consult your owner’s manual
or local dealer to find the correct harness for your motorcycle.
Description P/N Retail
Plug & Play Headlight Module 48-2001 $74.95
Dual H-4 Adapter Harness 48-2002 14.95
Dual H-7J Adapter Harness 48-2003 19.95
Single H-4 Adapter Harness 48-2004 12.95
Universal Adapter Harness 48-2005 12.95
48-2002
48-2001
48-2003
48-2004
48-2005
SIGNAL DYNAMICS
STREET • TUCKER ROCKY DISTRIBUTING
NEW PART NUMBERS ARE RED • ALSO SEE OUR 2012 APPAREL & OFFROAD CATALOGS
ELECTRICAL
ELECTRICAL
1168
STREET
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
CRUISER &
TOURING
SEATS &
LUGGAGE
DECALS &
GRAPHICS
CONTROL
SUSPENSION
DRIVE
BRAKE
ENGINE
FUEL & AIR
ELECTRICAL
CHEMICAL
SECURITY
& COVERS
TRAILERS
& STANDS
TOOLS &
SUPPLIES
DISPLAY
& PROMO
CROSS
REFERENCE
SIGNAL DYNAMICS
BackOff
™
BRAKE HOLD MODULE
• Keeps your brake lights on when you are stopped or stopping
so you don't have to
• Easy Installation: simply install the Brake-Hold Module inline
with the wire leading to the brake light, connect to a switched
power source and ground wire and tap a wire into your bike’s
speed sensor
• Large power capacity: 12 volts DC, maximum capacity 10A
• Sealed weather resistant heat sink case
• Compact size: 2-1/4”L x 1-5/8”W x 5/8”H
• 1-year manufacturer’s limited warranty
Note: Your bike must have Electronic Pick-Up Sensor.
48-2000 $64.95