Instruction manual

s

SINGLE SOUND

: The remote will display a selection of icons on

the status screen with beeps and tones then stop.

s

LOOP SILENT

: The remote will display a selection of icons on

the status screen without beeps and tones in an endless loop until

the battery charger is disconnected.

s

LOOP SOUND

: The remote will display a selection of icons on

the status screen with beeps and tones in an endless loop until the

battery charger is disconnected.

Note

Loop Silent and Loop Sound are not available and will not

appear in the Demo Mode menu unless the battery charger

is connected.

Power Off

When an extended period of non-operation is anticipated, turning the

power off will preserve the battery charge. Press the

button while

POWER OFF

is displayed. The status screen icons clear as the power

off tones play, the remote is turned off.

To turn the remote on, Press and hold the

button for 3 seconds,

the status screen icons refresh as the power on tones play. The remote

also turns itself on and begins charging when the battery charger is

connected.

Exit

To return to normal operation, press the button while EXIT is dis-

played.

Additional Remotes

This device does not support end user programming. To add a new

remote, please consult your local 12-volt retailer to have one pro-

grammed for you.