Instruction manual

16
© 2012 Directed. All rights reserved.
To exit; press and release the button to go back and repeat to exit.
1 short and 1 long beep is emitted for each step back, the LED turns
off when programming is exited.
Remote Features Menu
Press and release the
button, 2 LED flashes and beeps indi-
cate the remote features menu is accessed and can be set. Press
buttons indicated below, 1 beep and flash turns the feature on, 2
beeps and flashes turns the feature off.
s Autolock feature: Press
to turn on/off.
s Remote Beeps: Press
to turn on/off.
Remote Learning
Press the
button,3 LED flashes and beeps indicates the re-
mote is ready to program to the system.
Press and hold the
button, there is no confirmation of pair-
ing/learning completed for this remote control.