Owner's Manual

6
© 2012 Directed. All rights reserved.
Remote Control Configuration
Remote Pairing
The following instructions will step you through the remote pairing op-
eration.
1. Press and release the Integrated Programming Button (IPB) on the
XL202.
2. Within 5 seconds, press and hold the IPB. The status LED will flash
one time to confirm the system is ready for remote pairing.
3. Press the button, the remote will emit several tones to confirm pair-
ing is complete.
4. Release the IPB. Programming will exit by itself after 30 seconds
and the status LED turns off.
Note
Consult the installation center for the location of the XL202
or refer to dealer for programming.