Installation & Assembly

GLD Products Ion Dartboard
Item 42-0003
101-800-225-7593
www.gldproducts.com
2. This game is designed for use with 1" maximum length soft-tip darts only! Never use metal
tipped darts or longer soft-tip darts on this dartboard! Metal tipped darts will seriously
damage the circuitry, the e-BOARD computer, and electronic operation of the dartboard.
3. Electronic and mechanical reaction time is required between shots. If two shots occur
too close together, pull out second dart and rethrow to properly record your score.
4. If using an AC adapter, it must be 5V DC 1000 milliamp. The plug polarity is con# gured
as positive (+) outside, and negative (-) center. Using the wrong adapter may cause
electrical shock and damage to the unit.
5. Do not use excessive force when throwing darts. Throwing a dart too hard will cause
frequent tip breakage and cause excessive wear on the board.
6. Do not spill liquids on the dartboard. Do not use spray cleaners that contain ammonia or
other harsh chemicals, as they may damage the dartboard. Instead, we suggest regular
dusting with a damp cloth. Make sure the game is unplugged and use a mild detergent
and a damp cloth for more vigorous cleaning.
7. This game is for indoor use only.
Helpful Tip: To prevent dart tips from loosening,
twist the dart to the right (clockwise when pulling it
from the board. This motion will make dart removal
easier and will prolong the life of your dart tips.