Installation & Assembly

GLD Products Mounting Instructions
21-800-225-7593
www.gldproducts.com
MOUNTING THE DARTBOARD CABINET
Space Needed
The dartboard cabinet must be securely mounted and must be at a right angle to the oor.
The player throws a dart from a distance of 96 inches (244 cm) for a soft tipped dart and
93.25 inches (237 cm) for a steel tipped dart from the face of the dartboard. Allow room for
players to stand. Depending on the players’ accuracy, allow room around the dartboard for
missed throws. Refer to the mounting dimensions illustration below. If your dartboard needs
electrical power, mount the cabinet near an electrical outlet.
Dartboard cabinets come in many sizes. Typically the cabinet is mounted to a wall and the
dartboard is then mounted inside the cabinet.
A typical installation is shown here.
Center of Dartboard
Wall
Throwing or
Toe LIne
Plumb Line from
Face of Board to Floor
Floor
68 in.
(173 cm)
Cabinet
Dartboard
93.25 in. (steel tipped darts)
(237 cm)
96 in. (soft tipped darts)
(244 cm)
Included with the cabinet is a mounting kit. The kit contains four screws and four expansion
anchors for a solid wall. To use the anchors drill a 5/16-inch diameter hole 1-1/2-inch deep.
This same anchor may be used in drywall. Drill a 9/32-inch hole and push the anchor in the
hole, until it is ush to the wall.