Operation Manual

11
EN
VirtuFit iBiking Folding Bike
REsIstANcE AdjUstMENt
To ensure smooth ecient cycling action, the tension belt braking system on your folding bike has been
correctly adjusted by our factory during production.
To adjust the pedalling resistance during use, start by turning the Tension Control (19) fully
ANTI-CLOCKWISE at the start of your workout. Gradually increase the pedalling resistance by turning the
Tension Controller Knob CLOCKWISE as required.
LEvELLING thE BIkE
For security and stability, your folding bike has a factory welded frame and once fully assembled correctly,
should not need further alignment. However, in the interest of safety, please always ensure that your
folding bike is positioned on a solid, at surface. If necessary, use a rubber mat underneath to reduce the
possibility of slipping in use. If you need to make a ne adjustment, simply twist the end of either Rear
Frame Stabiliser Adjustable Hex End Cap (27) to compensate for uneven oors.