Operation Manual

16
VirtuFit iBiking Folding Bike
ENG
oPERAtIoN
coNtRoL PANEL oPERAtIoN
tRoUBLE shootING
1. When monitor power on (or press MODE, RESET key and hold for 3 seconds), LCD screen will
display all segments with Beep sound for one second and enter to SCAN mode as Drawing B.
2. With any signal been transmitted into the monitor, the value of TMR, DST, and CAL will start to
count up as Drawing C.
3. Without any signal been transmitted into the monitor for 4 minutes, the monitor will enter to
SLEEP mode.
- When the display show Drawing D, it means the batteries need to be changed .
- If there is no signal when you pedal, please check if the cable is well connected.
Drawing A Drawing B Drawing C Drawing D
17
VirtuFit iBiking Folding Bike
ENG
Turn on Bluetooth on your smart devices, and then start Fit Hi Way or iBiking
+
APP
on smart devices for connection.
Start workout with devices.
APP INSTRUCTION
Fit Hi Way and iBiking
+
instruction manuals :
Fit Hi Way and iBiking
+
APP download:
NOTE:
Download the APP in Google play or App Store.
Fit Hi Way
iBiking
+
The manuals will be
updated from time to
time, the consumer
can get the newest
version by scanning
the QR code.
1. Once console is connected to device via Bluetooth, the
2. Please exit Fit Hi Way or iBiking
+
Bluetooth from the smart device, then the console will
power on again.