Datasheet
CMA 0204
www.vishay.com
Vishay Beyschlag
Revision: 27-Mar-17
9
Document Number: 28717
For technical questions, contact: melf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS
Note
• Color code marking is applied according to IEC 60062
(1)
in four bands (E24 series). Each color band appears as a single solid line, voids are
permissible if at least
2
/
3
of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 % wider
than the other bands. An interrupted brown band between the 2
nd
and 3
rd
full band identifies the special carbon film
PATTERN STYLES FOR MELF RESISTORS
Notes
• The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x
(1)
,
or in publication IPC-7351
(1)
The quoted IEC standards are also released as EN standards with the same number and identical contents
DIMENSIONS AND MASS
TYPE / SIZE
L
(mm)
D
(mm)
L
1 min.
(mm)
D
1
(mm)
K
(mm)
MASS
(mg)
CMA 0204
3.6 + 0/- 0.2 1.4 + 0/- 0.1 1.8 D + 0/- 0.15 0.75 ± 0.1 19
RECOMMENDED SOLDER PAD DIMENSIONS
TYPE / SIZE
WAVE SOLDERING REFLOW SOLDERING
G
(mm)
Y
(mm)
X
(mm)
Z
(mm)
G
(mm)
Y
(mm)
X
(mm)
Z
(mm)
CMA 0204 1.5 1.5 1.8 4.5 1.7 1.2 1.6 4.1
L
1
K
D
1
D
L
G
X
Y
Z