Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler DIL-6 70 V

CNY17F

www.vishay.com

Vishay Semiconductors

Rev. 2.2, 08-Jan-14

Document Number: 83607

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, no Base Connection

DESCRIPTION

The CNY17F is an optocoupler consisting of a gallium

arsenide infrared emitting diode optically coupled to a

silicon planar phototransistor detector in a plastic plug-in

DIP-6 package.

The coupling device is suitable for signal transmission

between two electrically separated circuits. The potential

difference between the circuits to be coupled is not allowed

to exceed the maximum permissible reference voltages.

In contrast to the CNY17 series, the base terminal of the

F type is not conected, resulting in a substantially improved

common-mode interference immunity.

FEATURES

• Isolation test voltage, 5000 V

RMS

• No base terminal connection for improved

common mode interface immunity

• Long term stability

• Industry standard dual-in-line package

• Material categorization: For definitions of

compliance please see www.vishay.com/doc?99912

AGENCY APPROVALS

Safety application model number covering all products in

this datasheet is CNY17F. This model number should be

used when consulting safety agency documents.

• UL file no. E52744

• cUL tested to CSA 22.2 bulletin 5A

• DIN EN 60747-5-5 (VDE 0884-5), available with option 1

• BSI: EN 60065, EN 60950-1

• FIMKO EN60950

• CQC GB8898-2011

Notes

• Additional options may be possible, please contact sales office.

(1)

Also available in tubes; do not put T on end.

i179004-14

ORDERING INFORMATION

CNY17F- #X0##T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/PACKAGE CTR (%)

UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320

DIP-6 CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4

DIP-6, 400 mil, option 6 CNY17F-1X006 CNY17F-2X006 CNY17F-3X006 CNY17F-4X006

SMD-6, option 7 CNY17F-1X007

(1)

CNY17F-2X007T

(1)

CNY17F-3X007T

(1)

CNY17F-4X007T

(1)

SMD-6, option 9 CNY17F-1X009T

(1)

CNY17F-2X009T

(1)

CNY17F-3X009T

(1)

CNY17F-4X009T

(1)

VDE, UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320

DIP-6 CNY17F-1X001 CNY17F-2X001 CNY17F-3X001 CNY17F-4X001

DIP-6, 400 mil, option 6 CNY17F-1X016 CNY17F-2X016 CNY17F-3X016 CNY17F-4X016

SMD-6, option 7 CNY17F-1X017

(1)

CNY17F-2X017

(1)

CNY17F-3X017

(1)

CNY17F-4X017

(1)

SMD-6, option 9 CNY17F-1X019 CNY17F-2X019

(1)

CNY17F-3X019

(1)

7.62 mm 10.16 mm

> 8 mm

8 mm typ.

Option 7

Option 6

Option 9

DIP-6

Summary of content (9 pages)

PAGE 1
CNY17F www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, no Base Connection FEATURES • Isolation test voltage, 5000 VRMS A 1 6 NC C 2 5 C NC 3 4 E • No base terminal connection for improved common mode interface immunity • Long term stability • Industry standard dual-in-line package • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 AGENCY APPROVALS Safety application model number covering all products in this datasheet is CNY17F.
PAGE 2
CNY17F www.vishay.
PAGE 3
CNY17F www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER COUPLER Collector emitter, saturation voltage Coupling capacitance Collector emitter, leakage current TEST CONDITION PART SYMBOL CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4 VCEsat CC ICEO ICEO ICEO ICEO IF = 10 mA, IC = 2.5 mA VCE = 10 V MIN. TYP. MAX. UNIT 0.25 0.6 2 2 5 5 0.4 V pF nA nA nA nA 50 50 100 100 Note • Minimum and maximum values were tested requierements.
PAGE 4
CNY17F www.vishay.com IF Vishay Semiconductors +5V IF IF 0 0 tp IC R G = 50 Ω tp = 0.01 T t 100 % 90 % t p = 50 µs Channel I Oscilloscope R L = 1 MΩ C L = 20 pF Channel II 50 Ω 10 % 0 tr RL td ts t on 95 10804-3 Fig. 2 - Test Circuit, Non-Saturated Operation IF +5V I F = 10 mA 0 tp td tr t on (= td + tr) tf t off ts tf t off (= ts + tf) Pulse duration Delay time Rise time Turn-on time t Storage time Fall time Turn-off time 96 11698 Fig.
PAGE 5
CNY17F www.vishay.com Vishay Semiconductors 1.8 1.7 Tamb = 0 °C 1.6 Tamb = - 25 °C 1.5 1.4 Tamb = - 40 °C 1.3 T = - 55 °C amb 1.2 1.1 Tamb = 25 °C 1.0 Tamb = 50 °C 0.9 Tamb = 75 °C 0.8 Tamb = 100 °C 0.7 Tamb = 110 °C 0.6 0.1 1 10 100 10 000 IF = 0 mA ICE0 - Leakage Current (nA) VF - Forward Voltage (V) TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1000 VCE = 40 V 100 1 VCE = 12 V 0.1 0.01 0.
PAGE 6
CNY17F www.vishay.com 1000 1.2 IF = 10 mA VCE = 5 V VCC = 5 V fCTR - CTR Frequency (kHz) CTRNorm - Normalized CTR (NS) Vishay Semiconductors Tamb = 25 °C 1.0 Tamb = 0 °C 0.8 Tamb = - 40 °C Tamb = - 55 °C 0.6 Tamb = 50 °C Tamb = 75 °C 0.4 Tamb = 100 °C 0.2 100 10 Tamb = 110 °C 0 0.1 1 1 0.1 100 10 1 10 100 IF - Forward Current (mA) IC - Collector Current (mA) Fig. 11 - Normalized CTR (NS) vs. Forward Current Fig. 14 - CTR -3 dB Frequency vs.
PAGE 7
CNY17F www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6 5 4 6.5 ± 0.5 1 2 3 7.3 ± 0.5 7.62 ± 0.3 1.1 ± 0.1 3.5 ± 0.3 0.5 typ. 3.3 ± 0.5 2.8 ± 0.5 0.26 0.5 ± 0.1 2.54 ± 0.25 7.62 to 9.98 22530 Option 6 Option 7 7.62 typ. 7.62 typ. 3.5 ± 0.3 7.62 typ. 3.5 ± 0.3 0.35 ± 0.25 0.1 min. Option 9 0.6 min. 8 min. 2.7 min. 10.16 typ. 0.1 ± 0.1 0.6 min. 3.5 ± 0.3 8.16 ± 0.8 10.16 ± 0.3 10.3 max. 0.76 R 0.25 2.54 0.76 2.54 R 0.25 1.78 8 min. 11.
PAGE 8
CNY17F www.vishay.com Vishay Semiconductors TUBE AND TAPE INFORMATION DEVICES PER TUBE TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-6 50 40 2000 Ø 1.55 ± 0.05 2 ± 0.1 4 ± 0.1 1.75 ± 0.1 7.5 ± 0.1 16 ± 0.3 12 ± 0.1 0.3 ± 0.05 22537-1 Fig. 16 - Tape and Reel Drawing, 1000 Units per Reel Document Number: 83607 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.