Datasheet

ManualsBrandsVishay ManualsChip SMD ResistorsSMD Resistor 63mW, 1.2Ohm, 1 %, 0402

D/CRCW e3

www.vishay.com

Vishay

Revision: 18-Jun-2018

Document Number: 20035

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Standard Thick Film Chip Resistors

D/CRCW e3 standard thick film chip resistors are the perfect

choice for most fields of modern electronics where high

reliability and stability are of major concern. Typical

applications include automotive, telecommunications, and

industrial.

FEATURES

• Stability at different environmental conditions

R/R  1 % (1000 h rated power at 70 °C)

• 2 mm pitch packaging option for 0603 size

• AEC-Q200 qualified

• Material categorization: for definitions of

compliance please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive

• Industrial

• Telecommunication

Notes

(1)

Please refer to “Application Information” below

(2)

Apply to components with stability class 1

APPLICATION INFORMATION

When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal

resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted

film temperature is not exceeded.

These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift

increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a

functional lifetime.

TECHNICAL SPECIFICATIONS

DESCRIPTION

D10/CRCW0402

D11/CRCW0603

D12/CRCW0805

D25/CRCW1206

CRCW1210

CRCW1218

CRCW2010

CRCW2512

Imperial size 0402 0603 0805 1206 1210 1218 2010 2512

Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M RR3246M RR5025M RR6332M

Resistance

range

1  to 10 M; jumper (0 )

1  to

2.2 M;

jumper

(0 )

1  to 10 M;

jumper (0 )

Resistance

tolerance

± 5 %; ± 1 %

Temperature

coefficient

± 200 ppm/K; ± 100 ppm/K

Rated

dissipation, P

(1)

0.063 W 0.10 W 0.125 W 0.25 W 0.5 W 1.0 W 0.75 W 1.0 W

Operating

voltage,

max.

RMS

/DC

50 V 75 V 150 V 200 V 200 V 200 V 400 V 500 V

Permissible film

temperature,



F max.

(1)

155 °C

Operating

temperature

range

-55 °C to +155 °C

Max. resistance

change at P

for

resistance range,

|R/R|, after

(2)

1000 h  1 %

8000 h  2 %

Permissible

voltage

against ambient

(insulation):

1 min, U

ins

75 V 100 V 200 V 300 V 300 V 300 V 300 V 300 V

Summary of content (10 pages)

PAGE 1
D/CRCW e3 www.vishay.com Vishay Standard Thick Film Chip Resistors FEATURES • Stability at different environmental conditions R/R  1 % (1000 h rated power at 70 °C) • 2 mm pitch packaging option for 0603 size • AEC-Q200 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS D/CRCW e3 standard thick film chip resistors are the perfect choice for most fields of modern electronics where high reliability and stability are of major concern.
PAGE 2
D/CRCW e3 www.vishay.com Vishay TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE D10/CRCW0402 e3 D11/CRCW0603 e3 D12/CRCW0805 e3 D25/CRCW1206 e3 CRCW1210 e3 CRCW1218 e3 CRCW2010 e3 CRCW2512 e3 TCR TOLERANCE RESISTANCE E-SERIES ± 200 ppm/K ±5% 1  to 10 M E24 ± 100 ppm/K ±1% 1  to 10 M E24; E96 Jumper, Imax. = 1.5 A  20 m 0 - ± 200 ppm/K ±5% 1  to 10 M E24 ± 100 ppm/K ±1% 1  to 10 M E24; E96 Jumper, Imax. = 2.
PAGE 3
D/CRCW e3 www.vishay.
PAGE 4
D/CRCW e3 www.vishay.com Vishay DESCRIPTION MATERIALS Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A cermet film layer and a glass-over are deposited on a high grade (Al2O3) ceramic substrate with its prepared inner contacts. A special laser is used to achieve the target value by smoothly fine trimming the resistive layer without damaging the ceramics.
PAGE 5
D/CRCW e3 www.vishay.com Vishay FUNCTIONAL PERFORMANCE Single Pulse 10000 2512 1218 2010 1210 1206 0805 0603 0402 100 10 1000 1st line 2nd line 2 nd line ^ Pmax. - Pulse Load (W) Axis Title 1000 1 100 0.1 0.01 0.000001 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 ti - Pulse Duration (s) 2nd line Maximum pulse load, single pulse; applicable if P  0 and n < 1000 and Uˆ = Uˆ max.
PAGE 6
D/CRCW e3 www.vishay.com Vishay Derating 70 10000 CRCW2512, CRCW1218 CRCW2010 CRCW1210 CRCW1206 CRCW0805 CRCW0603 CRCW0402 1 0.8 1000 1st line 2nd line 2nd line P - Power Dissipation (W) Axis Title 1.2 0.6 0.4 100 0.
PAGE 7
D/CRCW e3 www.vishay.com Vishay TESTS AND REQUIREMENTS All executed tests are carried out in accordance with the following specifications: The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5201-1. EN 60115-1, generic specification The tests are carried out under standard atmospheric conditions in accordance with IEC 60068-1, 4.
PAGE 8
D/CRCW e3 www.vishay.com Vishay TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60082-2 (1) TEST METHOD PROCEDURE TEST REQUIREMENTS PERMISSIBLE CHANGE (R) STABILITY CLASS 1 STABILITY CLASS 2 OR BETTER OR BETTER Stability for product types: 1  to 10 M D/CRCW e3 4.39 - Periodic electric overload 15 x P 70 x R or U = 2 x Umax.; whichever is the less severe; 0.1 s on; 2.5 s off; 1000 cycles 4.
PAGE 9
D/CRCW e3 www.vishay.com Vishay DIMENSIONS DIMENSIONS AND MASS TYPE / SIZE D10/CRCW0402 e3 L (mm) 1.0 ± 0.05 W (mm) H (mm) T1 (mm) T2 (mm) MASS (mg) 0.65 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.05 0.2 ± 0.10 D11/CRCW0603 e3 1.55 + 0.10 / - 0.05 0.85 ± 0.10 0.45 ± 0.05 0.3 ± 0.20 0.3 ± 0.20 2 D12/CRCW0805 e3 2.0 + 0.20 / - 0.10 1.25 ± 0.15 0.45 ± 0.05 0.3 + 0.20 / - 0.10 0.3 ± 0.20 5.5 D25/CRCW1206 e3 3.2 + 0.10 / - 0.20 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.20 0.4 ± 0.20 10 CRCW1210 e3 3.
PAGE 10
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.