Datasheet

ManualsBrandsVISHAY ManualsOptoelectronics & DisplaysILD 2XX SMD Optocoupler Type (misc.) Phototransistor/Dual

VISHAY

ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T

Document Number 83647

Rev. 1.3, 19-Apr-04

Vishay Semiconductors

www.vishay.com

i179018

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8

package

Features

• Two Channel Coupler

• SOIC-8A Surface Mountable Package

• Standard Lead Spacing of .05 "

• Available only on Tape and Reel Option (Con-

forms to EIA Standard 481-2)

• Isolation Test Voltage, 3000 V

RMS

• Compatible with Dual Wave, Vapor Phase and IR

Reflow Soldering

Agency Approvals

• UL - File No. E52744 System Code Y

Description

The ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T are

optically coupled pairs with a Gallium Arsenide infra-

red LED and a silicon NPN phototransistor. Signal

information, including a DC level, can be transmitted

by the device while maintaining a high degree of elec-

trical isolation between input and output. The

ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T come in a

standard SOIC-8A small outline package for surface

mounting which makes it ideally suited for high den-

sity applications with limited space. In addition to elim-

inating through-holes requirements, this package

conforms to standards for surface mounted devices.

A specified minimum and maximum CTR allows a

narrow tolerance in the electrical design of the adja-

cent circuits. The high BV

CEO

of 70 V gives a higher

safety margin compared to the industry standard of

30 V.

Order Information

For additional information on the available options refer to

Option Information.

Absolute Maximum Ratings

amb

= 25 °C, unless otherwise specified

Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is

not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

Maximum Rating for extended periods of the time can adversely affect reliability.

Input

Part Remarks

ILD205T CTR 40 - 80 %, SOIC-8

ILD206T CTR 63 - 125 %, SOIC-8

ILD207T CTR 100 - 200 %, SOIC-8

ILD211T CTR > 20 %, SOIC-8

ILD213T CTR > 100 %, SOIC-8

ILD217T CTR > 100 %, SOIC-8

Parameter Test condition Symbol Value Unit

Peak reverse voltage V

6.0 V

Peak pulsed current 1.0 µs, 300 pps 1.0 A

Continuous forward current per

channel

30 mA

Power dissipation P

diss

50 mW

Derate linearly from 25 °C 0.66 mW/°C

Summary of content (7 pages)

PAGE 1
VISHAY ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package Features • • • • Two Channel Coupler SOIC-8A Surface Mountable Package Standard Lead Spacing of .05 " Available only on Tape and Reel Option (Conforms to EIA Standard 481-2) • Isolation Test Voltage, 3000 VRMS • Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering A1 8C C2 7E A3 6C C4 5E i179018 Agency Approvals • UL - File No.
PAGE 2
ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T VISHAY Vishay Semiconductors Output Symbol Value Unit Collector-emitter breakdown voltage Parameter Test condition BVCEO 70 V Emitter-collector breakdown voltage BVECO 7.0 V Power dissipation per channel Pdiss Derate linearly from 25 °C 125 mW 1.67 mW/°C Coupler Parameter Test condition Symbol Value Unit Ptot 300 mW 4.
PAGE 3
ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T VISHAY Vishay Semiconductors Current Transfer Ratio Parameter DC Current Transfer Ratio Test condition VCE = 5.0 V, IF = 10 mA VCE = 5.0 V, IF = 1.0 mA Part Symbol Min ILD205T CTRDC 40 Typ.
PAGE 4
ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T VISHAY Vishay Semiconductors 0.8 V CE=5 V 0.6 0.4 V CE=0.4 V 0.2 0.0 .01 .1 1 10 IF - LED Current - (mA) Vce=50 V Vce=50 V 100 iild205t_03 Ta - Temperature (°C) iild205t_06 Fig. 3 Normalized CTRce vs. Forward Current 1.2 NCTRce - normalized CTRce Iceo-Leakage Current - (µa) CTR normalized @ IF = 10 mA 1.0 CTR nonsat normalized @ IF=10 mA VCE=10 V 1.0 IF=10 mA 0.8 0.6 IF=5 mA 0.4 0.2 IF=1 mA Fig. 6 Collector Current vs.
PAGE 5
ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T VISHAY Vishay Semiconductors Input toff ton VCC=5 V Input RL VOUT tpdoff tpdon Output tr td ts tr 10% 10% 50% 50% 90% 90% iild205t_08 Fig. 8 Switching Time Test Schematic and Waveform Package Dimensions in Inches (mm) .120±.002 (3.05±.05) R .010 (.13) CL .154±.002 (3.91±.05) .240 (6.10) .050 (1.27) .014 (.36) .036 (.91) .170 (4.32) .260 (6.6) .016 (.41) Pin One I.D. ISO Method A .230±.002 (5.84±.05) .004 (.10) .008 (.
PAGE 6
ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
PAGE 7
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.