Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler SOIC-8 70 V

ILD205T, ILD206T, ILD207T, ILD211T, ILD213T

www.vishay.com

Vishay Semiconductors

Rev. 2.1, 23-Oct-15

Document Number: 83647

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, Dual Channel,

SOIC-8 Package

DESCRIPTION

The ILD205T, ILD206T, ILD207T, ILD211T, and ILD213T are

optically coupled pairs with a gallium arsenide infrared LED

and a silicon NPN phototransistor. Signal information,

including a DC level, can be transmitted by the device while

maintaining a high degree of electrical isolation between

input and output. The ILD205T, ILD206T, ILD207T, ILD211T,

and ILD213T come in a standard SOIC-8 small outline

package for surface mounting which makes it ideally suited

for high density applications with limited space. In addition

to eliminating through-holes requirements, this package

conforms to standards for surface mounted devices.

A specified minimum and maximum CTR allows a narrow

tolerance in the electrical design of the adjacent circuits. The

high BV

CEO

of 70 V gives a higher safety margin compared

to the industry standard of 30 V.

FEATURES

• Two channel coupler

• SOIC-8 surface mountable package

• Standard lead spacing of 0.05"

• Available only on tape and reel option

(conforms to EIA standard 481-2)

• Isolation test voltage, 4000 V

RMS

• Compatible with dual wave, vapor phase and IR reflow

soldering

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

AGENCY APPROVALS

• UL1577, file no. E52744 system code Y

• cUL - file no. E52744, equivalent to CSA bulletin 5A



i179018-2

i179025

ORDERING INFORMATION

ILD2##T

PART NUMBER

AGENCY CERTIFIED/PACKAGE

CTR (%)

10 mA

UL, cUL 40 to 80 63 to 125 100 to 200  20  100

SOIC-8 ILD205T ILD206T ILD207T ILD211T ILD213T

SIOC-8

6.1 mm

Summary of content (8 pages)

PAGE 1
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package FEATURES A1 8C • Two channel coupler C2 7E • SOIC-8 surface mountable package A3 6C • Standard lead spacing of 0.
PAGE 2
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T www.vishay.
PAGE 3
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Delay time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) td - 3 - μs Rise time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) tr - 3 - μs Fall time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) tf - 4.
PAGE 4
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T www.vishay.
PAGE 5
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T Vishay Semiconductors 1.2 1.2 1.0 NCTR - Normalized CTR (sat) NCTR - Normalized CTR (non-sat.) www.vishay.com IF = 10 mA 0.8 0.6 IF = 1 mA 0.4 0.2 Normalized to CTR value: IF = 10 mA, VCE = 5 V, Tamb = 25 °C 0 -60 -40 -20 0 20 40 60 0.8 0.4 Tamb = 25 °C 0.2 Tamb = 75 °C Tamb = 100 °C 0 80 100 120 0.1 1 10 100 IF - Forward Current (mA) Fig. 8 - Normalized CTR (saturated) vs. Ambient Temperature Fig. 11 - Normalized CTR (saturated) vs.
PAGE 6
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) PACKAGE MARKING (example) D205 V YWW Y 68 Note • Tape and reel suffix (T) is not part of the package marking. Rev. 2.1, 23-Oct-15 Document Number: 83647 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 7
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T www.vishay.com Vishay Semiconductors TAPE AND REEL PACKAGING FOR DUAL CHANNELS Selected dual SOIC8 optocouplers are available in tape and reel format. To order surface mount ILD2XX optocoupler on tape and reel, add a suffix “T” after the part number, i.e., ILD207T.
PAGE 8
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.