Datasheet

Document Number: 50054 For technical questions, contact: [e-mail]
www.vishay.com
Revision: 27-Oct-10 69
LPS 800
Power Resistor for Mounting onto a Heatsink
Thick Film Technology
Vishay Sfernice
OVERLOADS
In any case the applied voltage must be lower than U
L
= 5000 V.
Short time overload: 1.5 x P
r
/10 s
Accidental overload: The values indicated on the following
graph are applicable to resistors in air or mounted onto a
heatsink.
ENERGY CURVE
POWER RATING
The temperature of the case should be maintained within the
limits specified in the following figure.
To optimize the thermal conduction, contacting surfaces
should be coated with silicone grease or thermal film, and
heatsink mounting screws tightened to 2 Nm.
MARKING
Series, style, ohmic value (in Ω), tolerance (in %),
manufacturing date, Vishay Sfernice trademark.
OVERLOAD DURATION IN s
ENERGY IN J
10 000
1000
100
10
1
0.1
10
-6
10
-5
10
-4
10
-3
10
-2
10
-1
1
BOTTOM CASE TEMPERATURE IN °C
RATED DISSIPATION IN %
100
80
60
40
20
0
0 50 100 150 200
85 175
PACKA GI NG
Box of 15 units
ORDERING INFORMATION
LPS 800 100 kΩ ± 1 % xxx BO15 e
MODEL STYLE RESISTANCE
VALUE
TOLERANCE
± 1 %
± 2 %
± 5 %
± 10 %
CUSTOM
DESIGN
Optional
on request:
Special TCR,
shape etc.
PACKAGING LEAD (Pb)-FREE
GLOBAL PART NUMBER INFORMATION
GLOBAL
MODEL
DIELECTRIC OHMIC VALUE TOLERANCE PACKAGING
SPECIAL
LPS 800 L = Dielectric
strength 7 kV
H = Dielectric
strength 12 kV
The first three digits are
significant figures and the
last digit specifies the
number of zeros to follow. R
designates decimal point.
48R7 = 48.7 Ω
47R0 = 47 Ω
1001 = 1 kΩ
4R70 = 4.7 Ω
R240 = 0.24 Ω
F = 1 %
G = 2 %
J = 5 %
K = 10 %
B = Box 15 pieces As applicable
ZAx
800H47R JS 0P 0BL