Datasheet

ManualsBrandsVishay ManualsPassive ComponentsRotary Potentiometer 220Ohm, 3W, ±20 %

Document Number: 51037 For technical questions, contact: sfer@vishay.com

www.vishay.com

Revision: 29-Jun-06 See also: A

pplication notes 131

PE30

Vishay Sfernice

Fully Sealed Container Cermet Potentiometer

Military and Professional Grade

FEATURES

• 3 Watt at 70 °C

• High power rating

• Low temperature coefficient (100 ppm/°C typical)

• Full sealing

• Mechanical strength

• Use of faston 2.86 connections

• Tests according to CECC 41 000

DIMENSIONS in millimeters

(2)

(3)

(1)

76°

0.5 3

2.85

R = 5.2

ø 19.7

20 max

ø 6

14 wrench

Thread M10 x 0.75

11.5

AL = 50

AM = 25

AC = 16

6.5

14 wrench

12 wrench

ø 2

9.2

12.5

0.8

flats located

2.3

Ø 1.2

8 ± 0.2

Ø 10.5

23 max

Ø 6

flats located

Thread M10 × 0.75

AL = 47 ± 0.8

AM = 22 ± 0.8

slot 1 × 1.8 deep

sealing ring

Ø 19.7

AC = 13 ± 0.8

0.7

CIRCUIT DIAGRAM

Panel sealed version

PE30P - PE30PE

PE: Including locating peg

DBAN SHAFT LOCKING

PE30 LPRP - WITH LOCATING PEG

PE30

Tolerance unless otherwise specified ± 0.5

RoHS

COMPLIANT

Summary of content (4 pages)

PAGE 1
PE30 Vishay Sfernice Fully Sealed Container Cermet Potentiometer Military and Professional Grade FEATURES • 3 Watt at 70 °C • High power rating RoHS • Low temperature coefficient (100 ppm/°C typical) COMPLIANT • Full sealing • Mechanical strength • Use of faston 2.86 connections • Tests according to CECC 41 000 DIMENSIONS in millimeters PE30 20 max 12 11.5 14 wrench Thread M10 x 0.75 8 76° a ø6 ø 19.7 c R= 0.5 5.2 3 AC = 16 b 2.
PAGE 2
PE30 Vishay Sfernice Fully Sealed Container Cermet Potentiometer Military and Professional Grade SPECIAL FEATURES COMMAND SHAFT SHAFT LOCKING: DBAN Length is measured from the mounting surface to the free end of the shaft. The screwdriver slot is aligned with the wiper within ± 10°. Special shafts are available, in accordance to drawings supplied by customers. We recommend that customers should not machine shafts, in order to avoid damage. Bending or torsion of terminals should also be avoided.
PAGE 3
PE30 Fully Sealed Container Cermet Potentiometer Military and Professional Grade Vishay Sfernice PERFORMANCE CECC 41 301 - 002 TESTS CONDITIONS Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles Climatic Sequence ± 10 % ± 10 % ± 0.5 % 50 g at 11 ms 3 successive shocks in 3 directions ±2% ± 0.1 % ± 0.2 % 10 - 55 Hz 0.75 mm or 10 g during 6 hours ±2% ± 0.1 % ± 0.2 % 1000 h at rated power 90’/30’ - ambient temp.
PAGE 4
Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.