Datasheet

ManualsBrandsVISHAY ManualsOptoelectronics & DisplaysOptocoupler DIP-6 Type (misc.) Phototransistor/Single

Document Number: 83664 For technical questions, contact: optocoupler.answers@vishay.com

www.vishay.com

Rev. 1.5, 10-Dec-08 601

Optocoupler, Phototransistor Output,

Low Input Current, with Base Connection, 5300 V

RMS

SFH608

Vishay Semiconductors

DESCRIPTION

The SFH608 is an optocoupler designed for high current

transfer ratio at low input currents with the output transistor

saturated. This makes the device ideal for low current

switching applications. The SFH608 is packaged in a six pin

plastic DIP.

AGENCY APPROVALS

• UL1577, file no. E52744 system code H or J, double

protection

• DIN EN 60747-5-5 (VDE 0884) available with option 1

• CSA 93751

• BSI IEC 60950; IEC 60065

FEATURES

• Very high CTR at I

= 1.0 mA, V

= 0.5 V

• Specified minimum CTR at I

= 0.5 mA

•V

= 1.5 V ≥ 32 % (typ. 120 %)

• Good CTR linearity with forward current

• Low CTR degradation

• High collector-emitter voltage, V

CEO

= 55 V

• Isolation test voltage: 5300 V

RMS

• Low current input

• Low coupling capacitance

• High common mode transient immunity

• Lead (Pb)-free component

• Component in accordance to RoHS 2002/95/EC and

WEEE 2002/96/EC

APPLICATIONS

• Telecommunications

• Industrial controls

• Office machines

• Microprocessor system interfaces

Note

For additional information on the available options refer to option information.

i179004

ORDER INFORMATION

PART REMARKS

SFH608-2 CTR 63 % to 125 %, DIP-6

SFH608-3 CTR 100 % to 200 %, DIP-6

SFH608-4 CTR 160 % to 320 %, DIP-6

SFH608-5 CTR 250 % to 500 %, DIP-6

SFH608-2-X006 CTR 63 % to 125 %, DIP-6 400 mil (option 6)

SFH608-2-X007 CTR 63 % to 125 %, SMD-6 (option 7)

SFH608-2-X009 CTR 63 % to 125 %, SMD-6 (option 9)

SFH608-3-X006 CTR 100 % to 200 %, DIP-6 400 mil (option 6)

SFH608-3-X007 CTR 100 % to 200 %, SMD-6 (option 7)

SFH608-4-X006 CTR 160 % to 320 %, DIP-6 400 mil (option 6)

SFH608-4-X007 CTR 160 % to 320 %, SMD-6 (option 7)

SFH608-5-X007 CTR 250 % to 500 %, SMD-6 (option 7)

Summary of content (8 pages)

PAGE 1
SFH608 Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, with Base Connection, 5300 VRMS FEATURES • Very high CTR at IF = 1.0 mA, VCE = 0.5 V A 1 6 B C 2 5 C NC 3 4 E • Specified minimum CTR at IF = 0.5 mA • VCE = 1.5 V ≥ 32 % (typ.
PAGE 2
SFH608 Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, with Base Connection, 5300 VRMS ABSOLUTE MAXIMUM RATINGS PARAMETER (1) TEST CONDITION SYMBOL VALUE UNIT VR IF 6 50 2.
PAGE 3
SFH608 Optocoupler, Phototransistor Output, Low Input Current, with Base Connection, 5300 VRMS Vishay Semiconductors ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL IC = 0.32 mA, IF = 1 mA IC = 0.5 mA, IF = 1 mA IC = 0.8 mA, IF = 1 mA IC = 1.25 mA, IF = 1 mA SFH608-2 SFH608-3 SFH608-4 SFH608-5 CC VCEsat VCEsat VCEsat VCEsat COUPLER Coupling capacitance Saturation voltage, collector emitter MIN. TYP. MAX. UNIT 0.6 0.25 0.25 0.25 0.25 0.4 0.4 0.4 0.
PAGE 4
SFH608 Optocoupler, Phototransistor Output, Low Input Current, with Base Connection, 5300 VRMS Vishay Semiconductors TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 240 % IF CTR RL 200 160 VCC IC IF = 5 mA 120 IF = 2 mA 80 47 Ω 40 0 - 40 - 20 isfh608_01 IF = 1 mA VCE = 1.5 V CTR = f (TA, IF) 0 20 IF = 0.5 mA 40 isfh608_04 Fig. 1 - Switching Schematic ºC 100 Fig. 4 - Current Transfer Ratio (typ.) 1.2 103 V 1.15 t off t 60 TA µs tF 102 Vr VF = f (IF) 1.
PAGE 5
SFH608 Optocoupler, Phototransistor Output, Low Input Current, with Base Connection, 5300 VRMS ICE 12 mA 10 ICE = f (VCE, IB) 8 Ptot IB = 15 µA 4 125 75 50 10-1 100 isfh608_07 101 VCE Diode 25 IB = 5 µA 0 10-2 Transistor 100 IB = 10 µA 2 Ptot = f (TA) 150 IB = 20 µA 6 0 V 102 0 25 12 mA 10 50 IF = 5 mA ICE = f (VCE, IF) CXX 40 CCB 30 4 IF = 2 mA 2 IF = 1 mA 0 10-2 IF = 0.
PAGE 6
SFH608 Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, with Base Connection, 5300 VRMS PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 0.248 (6.30) 0.256 (6.50) ISO method A 0.335 (8.50) 0.343 (8.70) 0.048 0.039 (1.00) min. 0.300 (7.62) (0.45) typ. 0.022 (0.55) 0.130 (3.30) 0.150 (3.81) 18° 4° typ. 0.114 (2.90) 0.031 (0.80) min. 0.031 (0.80) 0.018 (0.45) 0.130 (3.0) 3° to 9° 0.035 (0.90) 0.300 to 0.347 0.022 (0.55) i178004 0.010 (0.
PAGE 7
SFH608 Optocoupler, Phototransistor Output, Low Input Current, with Base Connection, 5300 VRMS Vishay Semiconductors OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2.
PAGE 8
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.