Datasheet

ManualsBrandsVISHAY ManualsOptoelectronics & DisplaysOptocoupler DIP-4 Type (misc.) Phototransistor/Single

Table Of Contents

Document Number: 83666 For technical questions, contact: optocoupler.answers@vishay.com

www.vishay.com

Rev. 2.0, 10-Dec-08 607

Optocoupler, Phototransistor Output,

High Reliability, 5300 V

RMS

SFH610A, SFH6106

Vishay Semiconductors

DESCRIPTION

The SFH610A (DIP) and SFH6106 (SMD) feature a high

current transfer ratio, low coupling capacitance and high

isolation voltage. These couplers have a GaAs infrared diode

emitter, which is optically coupled to a silicon planar

phototransistor detector, and is incorporated in a plastic

DIP-4 or SMD package.

The coupling devices are designed for signal transmission

between two electrically separated circuits.

The couplers are end-stackable with 2.54 mm spacing.

Creepage and clearance distances of > 8.0 mm are achieved

with option 6. This version complies with IEC 60950

(DIN VDE 0805) for reinforced insulation up to an operation

voltage of 400 V

RMS

or DC. Specifications subject to change.

FEATURES

• Good CTR linearity depending on forward

current

• Isolation test voltage, 5300 V

RMS

• High collector emitter voltage, V

CEO

= 70 V

• Low saturation voltage

• Fast switching times

• Low CTR degradation

• Temperature stable

• Low coupling capacitance

• End stackable, 0.100" (2.54 mm) spacing

• High common mode interference immunity

• Lead (Pb)-free component

• Component in accordance to RoHS 2002/95/EC and

WEEE 2002/96/EC

AGENCY APPROVALS

• UL1577, file no. E52744 system code H or J, double

protection

• DIN EN 60747-5-5 (VDE 0884) available with option 1

• CSA 93751

• BSI IEC 60950; IEC 60065

Note

For additional information on the available options refer to option information.

FH610A

i179056

SFH6106

ORDER INFORMATION

PART REMARKS

SFH610A-1 CTR 40 % to 80 %, DIP-4

SFH610A-2 CTR 63 % to 125 %, DIP-4

SFH610A-3 CTR 100 % to 200 %, DIP-4

SFH610A-4 CTR 160 % to 320 %, DIP-4

SFH610A-5 CTR 250 % to 500 %, DIP-4

SFH6106-1 CTR 40 % to 80 %, SMD-4

SFH6106-2 CTR 63 % to 125 %, SMD-4

SFH6106-3 CTR 100 % to 200 %, SMD-4

SFH6106-4 CTR 160 % to 320 %, SMD-4

SFH6106-5T CTR 250 % to 500 %, SMD-4, tape and reel

SFH610A-1X006 CTR 40 % to 80 %, DIP-4 400 mil

SFH610A-1X018T CTR 40 % to 80 %, SMD-4 400 mil, wide leadspread

SFH610A-2X006 CTR 63 % to 125 %, DIP-4 400 mil

SFH610A-3X006 CTR 100 % to 200 %, DIP-4 400 mil

SFH610A-3X007 CTR 100 % to 200 %, SMD-4

SFH610A-4X006 CTR 160 % to 320 %, DIP-4 400 mil

Summary of content (10 pages)

PAGE 1
SFH610A, SFH6106 Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES SFH610A 1 4 E C 2 3 C A • Good CTR linearity depending on forward current • Isolation test voltage, 5300 VRMS • High collector emitter voltage, VCEO = 70 V • Low saturation voltage • Fast switching times • Low CTR degradation • Temperature stable • Low coupling capacitance • End stackable, 0.100" (2.
PAGE 2
SFH610A, SFH6106 Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS ABSOLUTE MAXIMUM RATINGS PARAMETER (1) TEST CONDITION SYMBOL VALUE UNIT VR IF IFSM Pdiss 6 60 2.5 100 V mA A mW VCE VEC IC IC Pdiss 70 7 50 100 150 V V mA mA mW VISO 5300 VRMS ≥7 ≥7 mm mm ≥ 0.4 mm INPUT Reverse voltage DC forward current Surge forward current Power dissipation OUTPUT Collector emitter voltage Emitter collector voltage t ≤ 10 µs Collector current tp ≤ 1.
PAGE 3
SFH610A, SFH6106 Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS Vishay Semiconductors ELECTRICAL CHARACTERISTICS PARAMETER COUPLER Collector emitter saturation voltage Coupling capacitance TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT 0.4 V IF = 10 mA, IC = 2.5 mA VCEsat 0.25 f = 1 MHz CC 0.4 pF Note Tamb = 25 °C, unless otherwise specified. Minimum and maximum values are testing requirements.
PAGE 4
SFH610A, SFH6106 Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX.
PAGE 5
SFH610A, SFH6106 Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Climatic classification (according to IEC 68 part 1) TYP. MAX.
PAGE 6
SFH610A, SFH6106 Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS Vishay Semiconductors 1.2 VF VF = f (IF) V IF 25 °C 50 °C 75 °C 120 mA Ptot = f (TA) 90 1.1 60 1.0 30 0.9 10-1 5 100 101 5 102 5 mA IF isfh610a_05 20 C 0 25 50 75 isfh610a_08 Fig. 5 - Diode Forward Voltage vs. Forward Current pF 0 TA °C 100 Fig. 8 - Permissible Power Dissipation vs. Temperature 200 Ptot mW f = 1.
PAGE 7
SFH610A, SFH6106 Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 0.268 (6.81) 0.255 (6.48) Pin 1 identification 0.190 (4.83) 0.179 (4.55) 0.312 (7.92) 0.296 (7.52) ISO Method A 10 ° 0.033 (0.84) 0.029 (0.74) 0.045 (1.14) 0.030 (0.76) 0.150 (3.81) 0.130 (3.30) 4° typ . 0.250 (6.35) 0.230 (5.84) 0.130 (3.30) 0.110 (2.79) 0.035 (0.89) 0.020 (0.51) 3° to 9° 0.052 (1.32) 0.048 (1.22) 0.012 (0.30) 0.008 (0.20) 0.
PAGE 8
SFH610A, SFH6106 Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS Option 6 Option 7 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.300 (7.62) typ. 0.028 (0.7) Option 8 0.300 (7.62) typ. 0.180 (4.6) 0.160 (4.1) 0.020 (0.50) 0.000 (0.00) 0.315 (8.0) min. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) www.vishay.com 614 0.331 (8.4) min. 0.406 (10.3) max. For technical questions, contact: optocoupler.answers@vishay.com 0.150 (3.81) 0.130 (3.
PAGE 9
SFH610A, SFH6106 Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS Vishay Semiconductors OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2.
PAGE 10
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.