Datasheet

ManualsBrandsVishay ManualsCapacitorsSolid Tantalum Capacitor 10uF 10VDC

TH3

www.vishay.com

Vishay Sprague

Revision: 07-Feb-2019

Document Number: 40084

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Solid Tantalum Surface Mount Capacitors

ANTAMOUNT™ Molded Case, HI-TMP

High Temperature 150 °C, Automotive Grade

PERFORMANCE / ELECTRICAL

CHARACTERISTICS

www.vishay.com/doc?40215

Operating Temperature: -55 °C to +150 °C

Capacitance Range: 0.33 μF to 220 μF

Capacitance Tolerance: ± 10 %, ± 20 %

Voltage Rating: 6.3 V

to 50 V

Note

• For recommended voltage derating guidelines see “Typical

Performance Characteristics”

FEATURES

• Operating temperature up to 150 °C with 50 %

voltage derating

• AEC-Q200 qualified

• 100 % surge current tested

(B, C, D, E case sizes)

• RoHS-compliant terminations available:

matte tin (all cases), gold (A, C, D, and E cases)

• Standard EIA 535BAAC case size (A through E)

• Compliant terminations

• Moisture sensitivity level 1

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and / or parts that are non RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information / tables in this datasheet for details

APPLICATIONS

• Automotive

• Industrial

• High temperature sensors

Notes

• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage

substitutions will be marked with the higher voltage rating

• Dry pack as specified in J-STD-033 for MSL3. Applicable for D and E cases only

Available

ORDERING INFORMATION

TH3 D 106 K 035 C 0700

TYPE CASE

CODE

CAPACITANCE CAPACITANCE

TOLERANCE

DC VOLTAGE

RATING AT +85 °C

TERMINATION AND

PACKAGING

ESR

See

Ratings

and Case

Codes

table.

This is expressed in

picofarads. The first

two digits are the

significant figures.

The third is the

number of zeros

to follow.

K = ± 10 %

M = ± 20 %

This is expressed in V.

To complete the

three-digit block, zeros

precede the voltage

rating. A decimal point

is indicated by an “R”.

(6R3 = 6.3 V)

Gold

A = 7" (178 mm) reel

B = 13" (330 mm) reel

Matte tin

C = 7" (178 mm) reel

D = 13" (330 mm) reel

V = 7" (178 mm) reel,

dry pack

U = 13" (330 mm) reel,

dry pack

Tin / lead

E = 7" (178 mm) reel

F = 13" (330 mm) reel

T = 7" (178 mm) reel,

dry pack

W = 13" (330 mm) reel,

dry pack

Maximum

100 kHz ESR

0500 = 500 m

5000 = 5.0 

10R0 = 10.0 

Summary of content (18 pages)

PAGE 1
TH3 www.vishay.
PAGE 2
TH3 www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] L W H TW Glue Pad TH (MIN.) P Glue Pad CASE CODE EIA SIZE L W H P TW TH (MIN.) A 3216-18 B 3528-21 C 6032-28 D 7343-31 E 7343-43 0.126 ± 0.008 [3.2 ± 0.20] 0.138 ± 0.008 [3.5 ± 0.20] 0.236 ± 0.012 [6.0 ± 0.30] 0.287 ± 0.012 [7.3 ± 0.30] 0.287 ± 0.012 [7.3 ± 0.30] 0.063 ± 0.008 [1.6 ± 0.20] 0.110 ± 0.008 [2.8 ± 0.20] 0.126 ± 0.012 [3.2 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.063 ± 0.
PAGE 3
TH3 www.vishay.com Vishay Sprague MARKING “A” CASE VOLTAGE CODE Capacitance code, pF Indicates high temperature Date code designation V 104H Voltage code Polarity band (+) A Case VOLTS CODE 4.0 G 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T Indicates high temperature Voltage Capacitance, μF 22 Polarity band (+) XX Date code H10 2 Vishay marking B, C, D, E Case Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating.
PAGE 4
TH3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 22 22 22 33 33 33 47 47 47 47 68 68 68 68 68 100 100 100 150 220 B C C B B D B C C D C C D D D C C D D E 1.0 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 15 15 22 22 22 22 33 33 33 47 47 47 68 100 100 100 A A A B A B A A B C B C C B C B C C D C C D C C D D D E E PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C (%) 10 VDC AT +85 °C; 7 VDC AT +125 °C; 5 VDC AT +150 °C TH3B226(1)010(2)1500 2.
PAGE 5
TH3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. ESR AT +25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 4 5.90 0.11 6 5.90 0.11 0.5 6 3.50 0.16 TH3B335(1)020(2)2700 0.7 6 2.70 0.18 C TH3C335(1)020(3)2700 0.7 6 2.70 0.20 4.7 A TH3A475(1)020(3)5000 0.9 6 5.00 0.12 4.7 B TH3B475(1)020(2)1900 0.9 6 2.90 0.17 4.7 B TH3B475(1)020(2)2900 0.9 6 1.90 0.21 4.7 C TH3C475(1)020(3)1700 0.9 6 1.70 0.25 10 C TH3C106(1)020(3)1100 2.0 6 1.10 0.
PAGE 6
TH3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C (%) MAX. ESR AT +25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) CAPACITANCE (μF) CASE CODE 0.33 A TH3A334(1)035(3)11R0 0.5 4 11.00 0.08 1.0 A TH3A105(1)035(3)6600 0.5 4 6.60 0.11 1.0 B TH3B105(1)035(2)4400 0.5 4 4.40 0.14 1.5 B TH3B155(1)035(2)4200 0.5 6 4.20 0.14 1.5 C TH3C155(1)035(3)3300 0.5 6 3.30 0.18 2.2 B TH3B225(1)035(2)2500 0.8 6 2.50 0.18 2.
PAGE 7
TH3 www.vishay.com Vishay Sprague STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 13" REEL A 2000 9000 B 2000 8000 C 500 3000 D 500 2500 E 400 1500 PRODUCT INFORMATION Guide for Molded Tantalum Capacitors Pad Dimensions www.vishay.com/doc?40074 Package Dimensions Moisture Sensitivity (MSL) www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.
PAGE 8
Molded Guide www.vishay.com Vishay Sprague Guide for Molded Tantalum Capacitors INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum / tantalum oxide / manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface mount assembly technology.
PAGE 9
Molded Guide www.vishay.com Vishay Sprague SOLID ELECTROLYTE TANTALUM CAPACITORS Solid electrolyte capacitors contain manganese dioxide, which is formed on the tantalum pentoxide dielectric layer by impregnating the pellet with a solution of manganous nitrate. The pellet is then heated in an oven, and the manganous nitrate is converted to manganese dioxide.
PAGE 10
Molded Guide www.vishay.com Vishay Sprague COMMERCIAL PRODUCTS SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES 793DX-CTC3CTC4 293D 593D TR3 TP3 TL3 High performance, automotive grade Very low DCL PRODUCT IMAGE Surface mount TANTAMOUNT™, molded case TYPE FEATURES Standard industrial grade CECC approved Low ESR TEMPERATURE RANGE CAPACITANCE RANGE VOLTAGE RANGE CAPACITANCE TOLERANCE -55 °C to +125 °C 0.1 μF to 1000 μF 0.1 μF to 100 μF 1 μF to 470 μF 0.47 μF to 1000 μF 0.1 μF to 470 μF 0.
PAGE 11
Molded Guide www.vishay.com Vishay Sprague HIGH RELIABILITY PRODUCTS SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES TM3 T83 CWR11 TANTAMOUNT™, molded case, hi-rel. TANTAMOUNT™, molded case, hi-rel.
PAGE 12
Molded Guide www.vishay.com Vishay Sprague PLASTIC TAPE AND REEL PACKAGING in inches [millimeters] 0.157 ± 0.004 [4.0 ± 0.10] Tape thickness Deformation between embossments 0.014 [0.35] MAX. 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] Top cover tape B1 MAX. (Note 6) Center lines of cavity 0.069 ± 0.004 [1.75 ± 0.10] Embossment 0.030 [0.75] MIN. (Note 3) B0 Top cover tape For tape feeder reference only including draft. Concentric around B0 (Note 5) 0.079 ± 0.002 [2.0 ± 0.05] A0 K0 0.004 [0.1] MAX.
PAGE 13
Molded Guide www.vishay.com Vishay Sprague RECOMMENDED REFLOW PROFILES Capacitors should withstand reflow profile as per J-STD-020 standard, three cycles. TEMPERATURE (°C) Tp TL Ts max. TC - 5 °C tp Max. ramp-up rate = 3 °C/s Max. ramp-down rate = 6 °C/s tL Preheat area Ts min. ts 25 Time 25 °C to peak TIME (s) PROFILE FEATURE Preheat / soak Temperature min. (Ts min.) Temperature max. (Ts max.) Time (ts) from (Ts min. to Ts max.
PAGE 14
Molded Guide www.vishay.com Vishay Sprague GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: be established when calculating permissible operating levels. (Power dissipation calculated using +25 °C temperature rise). P -----------R ESR 6. power dissipation in W at +25 °C as given in the tables in the product datasheets (Power Dissipation).
PAGE 15
Typical Performance Characteristics www.vishay.com Vishay Sprague Molded Chip Tantalum Capacitors, Automotive Grade ELECTRICAL PERFORMANCE CHARACTERISTICS ITEM Category temperature range Capacitance tolerance Dissipation factor ESR Leakage current Capacitance change by temperature Reverse voltage Ripple current Maximum operating and surge voltages vs.
PAGE 16
Typical Performance Characteristics www.vishay.com Vishay Sprague CATEGORY VOLTAGE VS. TEMPERATURE Axis Title 10000 0.8 1000 1st line 2nd line 2nd line Category Voltage (V) 1.0 0.6 0.4 100 0.2 10 0 -55 0 25 85 125 150 175 Temperature (°C) Note • Below 85 °C category voltage is equal to rated voltage TYPICAL LEAKAGE CURRENT FACTOR Axis Title 10000 100 +175 °C 1 1000 +150 °C +125 °C 1st line 2nd line 2nd line Leakage Current Factor 10 85 °C 0.1 +55 °C 100 +25 °C 0.
PAGE 17
Typical Performance Characteristics www.vishay.
PAGE 18
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.