Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesSMD LED PLCC2 Yellow 2.5 mcd 120 ° 2 mA 2.2 V

VLMA3100

www.vishay.com

Vishay Semiconductors

Rev. 1.2, 02-Oct-13

Document Number: 81709

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Low Current SMD LED PLCC-2

DESCRIPTION

These new devices have been designed to meet the

increasing demand for low current SMD LEDs.

The package of the VLMA3100 is the PLCC-2 (equivalent to

a size B tantalum capacitor).

It consists of a lead frame which is embedded in a white

thermoplast. The reflector inside this package is filled up

with clear epoxy.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD PLCC-2

• Product series: low current

• Angle of half intensity: ± 60°

FEATURES

• SMD LED with exceptional brightness

• Compatible with automatic placement

equipment

• EIA and ICE standard package

• Compatible with infrared, vapor phase and

wave solder processes according to CECC

• Available in 8 mm tape

• Low profile package

• Non-diffused lens: Excellent for coupling to

light pipes and backlighting

• Very low power consumption

• Luminous intensity ratio in one packaging unit

Vmax.

Vmin.

≤ 2.0

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive: Backlighting in dashboards and switches

• Telecommunication: Indicator and backlighting in

telephone and fax

• Indicator and backlight for audio and video equipment

• Indicator and backlight for battery driven equipment

• Small indicator for outdoor applications

• Indicator and backlight in office equipment

• Flat backlight for LCDs, switches, and symbols

• General use

Note

(1)

Driving the LED in reverse direction is suitable for short term application

19225

PARTS TABLE

PART COLOR

LUMINOUS INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMA3100-GS08 Yellow 0.28 2.5 - 6 581 - 594 2 - 2.2 2.9 2 GaAsP on GaP

VLMA3100-GS18 Yellow 0.28 2.5 - 6 581 - 594 2 - 2.2 2.9 2 GaAsP on GaP

ABSOLUTE MAXIMUM RATINGS (T

amb

= 25 °C, unless otherwise specified)

VLMA3100

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Reverse voltage

(1)

DC forward current I

7mA

Surge forward current t

≤ 10 μs I

FSM

0.5 A

Power dissipation P

20 mW

Junction temperature T

100 °C

Operating temperature range T

amb

-40 to +100 °C

Storage temperature range T

stg

-40 to +100 °C

Soldering temperature t ≤ 5 s T

260 °C

Thermal resistance junction/ambient Mounted on PC board (pad size > 16 mm

thJA

500 K/W

Summary of content (7 pages)

PAGE 1
VLMA3100 www.vishay.com Vishay Semiconductors Low Current SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Compatible with automatic placement equipment • EIA and ICE standard package • Compatible with infrared, vapor phase and wave solder processes according to CECC • Available in 8 mm tape • Low profile package • Non-diffused lens: Excellent for coupling to light pipes and backlighting • Very low power consumption • Luminous intensity ratio in one packaging unit IVmax./IVmin. ≤ 2.
PAGE 2
VLMA3100 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMA3100, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 2 mA VLMA3100 IV 0.28 2.5 - mcd Dominant wavelength IF = 2 mA λd 581 - 594 nm Peak wavelength IF = 2 mA λp - 585 - nm Angle of half intensity IF = 2 mA ϕ - ± 60 - deg Forward voltage IF = 2 mA VF - 2.2 2.
PAGE 3
VLMA3100 www.vishay.com Vishay Semiconductors 100 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 100 yellow 10 1 tP/T = 0.001 tP = 10 µs 0.1 0 1 2 3 10 1 0.1 0.01 0.1 5 4 VF - Forward Voltage (V) 95 10053 yellow Fig. 3 - Forward Current vs. Forward Voltage 10 100 Fig. 6 - Relative Luminous Intensity vs. Forward Current 1.2 2.0 yellow yellow 1.0 1.6 Irel - Relative Intensity IV rel - Relative Luminous Intensity 1 IF - Forward Current (mA) 95 10062 1.2 0.8 0.
PAGE 4
VLMA3100 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75±0.1 3.5±0.2 0.8 Technical drawings according to DIN specifications A C 2.2 2.8±0.15 Pin identification Dimensions in mm Drawing-No.: 6.541-5067.01-4 Issue: 6; 23.09.13 Ø2.4 3 +0.15 Mounting Pad Layout Area covered with solderresist 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: Reflow and vapor phase (wave soldering) Rev. 1.
PAGE 5
VLMA3100 www.vishay.com Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. EEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 13.00 12.75 2.5 1.
PAGE 6
VLMA3100 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H VISHAY 37 • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max.
PAGE 7
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.