Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesSMD LED PLCC2 Yellow 10 mcd 120 ° 10 mA 2.1 V

VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.

www.vishay.com

Vishay Semiconductors

Rev. 1.9, 26-Sep-13

Document Number: 84789

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Standard SMD LED PLCC-2

DESCRIPTION

These devices have been designed to meet the increasing

demand for surface mounting technology.

The package of the VLM.310. is the PLCC-2.

It consists of a lead frame which is embedded in a white

thermoplast. The reflector inside this package is filled up

with clear epoxy.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD PLCC-2

• Product series: standard

• Angle of half intensity: ± 60°

FEATURES

• SMD LEDs with exceptional brightness

• Luminous intensity categorized

• Compatible with automatic placement

equipment

• EIA and ICE standard package

• Compatible with infrared, vapor phase and

wave solder processes according to

CECC 00802 and J-STD-020

• Available in 8 mm tape

• Low profile package

• Non-diffused lens: Excellent for coupling to

light pipes and backlighting

• Low power consumption

• Luminous intensity ratio in one packaging unit 

Vmax.

Vmin.

 1.6

• Preconditioning according to JEDEC

level 2a

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive: Backlighting in dashboards, and switches

• Telecommunication: Indicator and backlighting in

telephone and fax

• Indicator and backlight for audio and video equipment

• Indicator and backlight in office equipment

• Flat backlight for LCDs, switches, and symbols

• General use

948553

PARTS TABLE

PART COLOR

LUMINOUS INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMH3100-GS08 Amber 2.8 10 - 10 612 - 625 10 - 2 2.8 20 GaAsP on GaP

VLMH3100-GS18 Amber 2.8 10 - 10 612 - 625 10 - 2 2.8 20 GaAsP on GaP

VLMH3101-GS08 Amber 4.5 - 11.2 10 612 - 625 10 - 2 2.8 20 GaAsP on GaP

VLMH3101-GS18 Amber 4.5 - 11.2 10 612 - 625 10 - 2 2.8 20 GaAsP on GaP

VLMH3102-GS08 Amber 7.1 - 18 10 612 - 625 10 - 2 2.8 20 GaAsP on GaP

VLMH3102-GS18 Amber 7.1 - 18 10 612 - 625 10 - 2 2.8 20 GaAsP on GaP

VLMO3100-GS08 Soft orange 2.8 8 - 10 598 - 611 10 - 2 2.8 20 GaAsP on GaP

VLMO3100-GS18 Soft orange 2.8 8 - 10 598 - 611 10 - 2 2.8 20 GaAsP on GaP

VLMO3101-GS08 Soft orange 4.5 - 11.2 10 598 - 611 10 - 2 2.8 20 GaAsP on GaP

VLMO3101-GS18 Soft orange 4.5 - 11.2 10 598 - 611 10 - 2 2.8 20 GaAsP on GaP

VLMY3100-GS08 Yellow 2.8 10 10 581 - 594 10 - 2.1 2.8 20 GaAsP on GaP

VLMY3100-GS18 Yellow 2.8 10 10 581 - 594 10 - 2.1 2.8 20 GaAsP on GaP

VLMY3101-GS08 Yellow 4.5 - 11.2 10 581 - 594 10 - 2.1 2.8 20 GaAsP on GaP

VLMY3101-GS18 Yellow 4.5 - 11.2 10 581 - 594 10 - 2.1 2.8 20 GaAsP on GaP

VLMY3102-GS08 Yellow 7.1 - 18 10 581 - 594 10 - 2.1 2.8 20 GaAsP on GaP

VLMY3102-GS18 Yellow 7.1 - 18 10 581 - 594 10 - 2.1 2.8 20 GaAsP on GaP

Summary of content (13 pages)

PAGE 1
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.
PAGE 2
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at IF at IF at IF (mcd) (nm) (V) TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLMG3100-GS08 Green 4.5 16 - 10 562 - 575 10 - 2.2 2.8 20 GaP on GaP VLMG3100-GS18 Green 4.5 16 - 10 562 - 575 10 - 2.2 2.8 20 GaP on GaP VLMG3102-GS08 Green 11.2 - 18 10 562 - 575 10 - 2.2 2.
PAGE 3
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMO310., SOFT ORANGE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT VLMO3100 IV 2.8 8 - mcd VLMO3101 IV 4.5 - 11.
PAGE 4
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)  VLMP310., PURE GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. VLMP3100 IV 1.12 4 - UNIT mcd VLMP3101 IV 1.8 - 4.5 mcd VLMP3102 IV 2.8 - 7.1 mcd Luminous intensity (1) IF = 10 mA IV 2.8 - 5.
PAGE 5
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.
PAGE 6
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors 1.2 Amber Amber 1.0 1.6 I rel - Relative Intensity IV rel - Relative Luminous Intensity 2.0 1.2 0.8 0.4 0.8 0.6 0.4 0.2 0 0 20 40 60 80 0 590 100 610 Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature 670 690 100 soft orange Amber 2.0 I F - Forward Current (mA) Ispec - Specific Luminous Intensity 650 Fig. 8 - Relative Intensity vs. Wavelength 2.4 1.6 1.2 0.8 0.4 0 10 1 0.
PAGE 7
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors 2.4 100 Ispec - Specific Luminous Intensity soft orange yellow - Forward Current (mA) 2.0 1.6 1.2 1 I F 0.8 10 0.4 0 95 10259 0.1 10 20 50 100 200 500 I F (mA) 1 0.5 0.2 0.1 0.05 0.02 t p /T 10 2 3 4 5 V F - Forward Voltage (V) 2.0 soft orange 1 0.1 yellow 1.6 1.2 0.8 0.4 0 0.01 1 95 9997 10 I F - Forward Current (mA) 60 80 100 Fig. 15 - Relative Luminous Intensity vs.
PAGE 8
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors 2.0 I v rel - Relative Luminous Intensity I v rel - Relative Luminous Intensity 10 yellow 1 0.1 1 10 1.2 0.8 0.4 100 0 I F - Forward Current (mA) 95 9999 95 10320 Fig. 17 - Relative Luminous Intensity vs. Forward Current 1.0 0.8 0.6 0.4 0.2 0 40 60 80 100 2.4 Ispec - Specific Luminous Intensity yellow 20 T amb - Ambient Temperature (°C) Fig. 20 - Relative Luminous Intensity vs.
PAGE 9
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors 2.4 1.2 ISpec - Specific Luminous Flux green Irel - Relative Intensity 1.0 0.8 0.6 0.4 0.2 0 540 560 580 1.2 0.8 0.4 620 600 10 95 10261 λ - Wavelength (nm) 95 10038 Fig. 23 - Relative Intensity vs. Wavelength IV rel - Relative Luminous Intensity pure green 10 1 0.1 0 95 9988 1 2 3 10 pure green 1 0.1 1 95 9998 VF - Forward Voltage (V) Fig. 24 - Forward Current vs. Forward Voltage 1000 0.
PAGE 10
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75±0.1 3.5±0.2 0.8 Technical drawings according to DIN specifications A C 2.2 2.8±0.15 Pin identification Dimensions in mm Drawing-No.: 6.541-5067.01-4 Issue: 6; 23.09.13 Ø2.4 3 +0.15 Mounting Pad Layout Area covered with solderresist 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: Reflow and vapor phase (wave soldering) Rev. 1.
PAGE 11
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18  (= 8000 PCS.) PREFERRED 10.4 8.
PAGE 12
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A H VISHAY • Storage temperature 10 °C to 30 °C 37 • Storage humidity  60 % RH max.
PAGE 13
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.