Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler SOP-4 60V

VO1400AEF

www.vishay.com

Vishay Semiconductors

Rev. 1.7, 14-Jul-15

Document Number: 84724

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 Form A Solid-State Relay

DESCRIPTION

The VO1400AEF is an optically isolated 1 form A solid-state

relay in a surface mount 4 pin SOP package.

APPLICATIONS

• Security systems

• Instrumentation

• Industrial controls

FEATURES

•Maximum R

5 Ω

• Load voltage 60 V

• Load current 100 mA

• Isolation test voltage 3750 V

RMS

• Small 4 pin SOP package

• Clean bounce free switching

• TTL / CMOS compatible input

• High reliability hybrid receptor

• Available on tape and reel

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

AGENCY APPROVALS

• UL, file no. E52744

• cUL, file no. E52744

• DIN EN 60747-5-5 (VDE 0884-5)

• FIMKO EN 60950-1

• CQC GB8898-2011

Notes

• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not

implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

maximum ratings for extended periods of the time can adversely affect reliability.

i179066_6

ORDERING INFORMATION

VO1400AEFT#

PART NUMBER ELECTRICAL

VARIATION

PACKAGE

CONFIG.

TAPE AND

REEL

PACKAGE UL, cUL, CQC, VDE, FIMKO

SOP-4, tape and reel VO1400AEFTR

SOP-4, tape and reel (product rotated in tape) VO1400AEFT1

ABSOLUTE MAXIMUM RATINGS (T

amb

= 25 °C, unless otherwise specified)

PARAMETER CONDITIONS SYMBOL VALUE UNIT

INPUT

LED continuous forward current I

50 mA

LED reverse voltage V

OUTPUT

DC or peak AC load voltage V

60 V

Load current AC peak I

100 mA

Peak load current t = 10 ms I

LPK

350 mA

SSR

Total power dissipation P

diss

120 mW

Ambient temperature range T

amb

-40 to +85 °C

Storage temperature range T

stg

-40 to +125 °C

Soldering temperature t ≤ 10 s max. T

sld

260 °C

SOP

Summary of content (9 pages)

PAGE 1
VO1400AEF www.vishay.com Vishay Semiconductors 1 Form A Solid-State Relay FEATURES • Maximum RON 5 Ω A 1 K 2 4 • Load voltage 60 V S1 • Load current 100 mA 3 • Isolation test voltage 3750 VRMS S2 • Small 4 pin SOP package • Clean bounce free switching • TTL / CMOS compatible input i179066_6 • High reliability hybrid receptor • Available on tape and reel DESCRIPTION • Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
VO1400AEF www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATING CURVE 120 140 IL - Load Current (mA) ISI - Input Safety Current (mA) 160 120 100 80 60 40 100 20 0 80 60 40 20 0 -50 -25 0 25 50 -40 75 100 125 150 175 Tamb - Ambient Temperature (°C) -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 1 - Input Safety Current vs. Ambient Temperature Fig. 3 - Load Current vs.
PAGE 3
VO1400AEF www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Turn-on time IF = 10 mA, VL = 20 V, IL = 100 mA ton - 52 500 μs Turn-off time IF = 10 mA, VL = 20 V, IL = 100 mA toff - 36 500 μs VL 1.25 ms Input Output ton toff Output 90 % 10 % 20991-2 Fig.
PAGE 4
VO1400AEF www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0.020 ILEAK - Leakage Current (μA) IF - Forward Current (mA) 100 T = 85 °C T = 25 °C 10 T = -40 °C 1 VLOAD = 60 V 0.015 0.010 0.005 0 0.6 0.8 1.0 1.2 1.4 -40 1.6 VF - Forward Voltage (V) 2.5 20 40 60 80 100 0.10 IL = 100 mA IL = 100 mA, tp = 5 ms ton - Turn-On Time (ms) IF - Forward Current for Switch Turn-On (mA) 0 Fig. 8 - Leakage Current vs.
PAGE 5
VO1400AEF www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) 6.95 ± 0.25 4.92 max. 5.35 typ. 4.42 ± 0.25 2.12 ± 0.20 0.20 ± 0.10 4.57 ± 0.25 0.05 ± 0.05 0.41 ± 0.10 2.54 nom. 4 5.0 min. 0.50 ± 0.15 Leads coplanarity 0.1 max. 3 2.54 Recommended footprint 1.15 1 2 5.10 0.90 Pin one I.D. 7.40 Fig. 11 - Package Drawings Rev. 1.7, 14-Jul-15 Document Number: 84724 5 For technical questions, contact: optocoupleranswers@vishay.
PAGE 6
VO1400AEF www.vishay.com Vishay Semiconductors PACKAGE MARKING 1400 V YWW 68 Fig. 12 - VO1400AEF Note • Tape and reel suffix (TR) is not part of the package marking. TAPE AND REEL INFORMATION (in millimeters) 2.0 ± 0.1 4.0 ± 0.1 1.5 ± 0.1 Pin 1 1.75 ± 0.1 0.35 ± 0.05 5.5 ± 0.1 12.0 ± 0.3 7.33 ± 0.1 7.33 ± 0.1 8.0 ± 0.1 4.72 ± 0.1 CL 1.5 ± 0.1 2.36 ± 0.1 2.66 ± 0.1 Note: • Cummulative tolerance of 10 spocket holes is 0.20 Fig. 13 - VO1400AEFT (2000 pieces on reel) Pin 1 2.0 ± 0.1 4.0 ± 0.
PAGE 7
VO1400AEF www.vishay.com Vishay Semiconductors SOLDER PROFILES HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 300 Temperature (°C) max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s 50 max. ramp up 3 °C/s 0 0 19841 50 100 150 200 250 300 Time (s) Fig.
PAGE 8
Footprint and Schematic Information www.vishay.com Vishay Semiconductors Footprint and Schematic Information for VO1400AEF The footprint and schematic symbols for the following parts can be accessed using the associated links. They are available in Eagle, Altium, KiCad, OrCAD / Allegro, Pulsonix, and PADS. Note that the 3D models for these parts can be found on the Vishay product page. PART NUMBER FOOTPRINT / SCHEMATIC VO1400AEFT1 www.snapeda.com/parts/VO1400AEFT1/Vishay/view-part VO1400AEFT2 www.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.