Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler SOP-4L 80V

VOL618A

www.vishay.com

Vishay Semiconductors

Rev. 1.8, 13-Oct-15

Document Number: 82405

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, Low Input Current,

4 Pin LSOP, Long Creepage Mini-Flat Package

DESCRIPTION

The VOL618A has a GaAs infrared emitting diode emitter,

which is optically coupled to a silicon planar phototransistor

detector, and is incorporated in a 4 pin LSOP wide body

package.

It features a high current transfer ratio, low coupling

capacitance, and high isolation voltage.

The coupling device is designed for signal transmission

between two electrically separated circuits.

FEATURES

• Low profile package

• High collector emitter voltage, V

CEO

= 80 V

• Isolation test voltage, 5000 V

RMS

• Isolation voltage V

IORM

= 1050 V

peak

• Low coupling capacitance

• High common mode transient immunity

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

APPLICATIONS

• Telecom

• Industrial controls

• Battery powered equipment

• Office machines

• Programmable controllers

AGENCY APPROVALS

(All parts are certified under base model VOL618A)

• UL1577, file no. E76222

• cUL CSA 22.2 bulletin 5A, double protection

• DIN EN 60747-5-5 (VDE 0884-5), available with option 1

• BSI: EN 60065:2002, EN 60950-1:2006

• FIMKO EN60950-1

• CQC: GB8898-2011, GB4943.1-2011

17295-6

ORDERING INFORMATION

VOL618A-#X001 T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/PACKAGE

CTR (%)

1 mA

UL, cUL, BSI, FIMKO, CQC 50 to 600 63 to 125 100 to 200

4 pin LSOP, mini-flat, long creepage VOL618AT VOL618A-2T VOL618A-3T

UL, cUL, BSI, FIMKO, CQC, VDE (option 1) 50 to 600 63 to 125 100 to 200

4 pin LSOP, mini-flat, long creepage - VOL618A-2X001T VOL618A-3X001T

LSOP-5

10.2 mm

Summary of content (9 pages)

PAGE 1
VOL618A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES • Low profile package A 1 4 C C 2 3 E • High collector emitter voltage, VCEO = 80 V • Isolation test voltage, 5000 VRMS • Isolation voltage VIORM = 1050 Vpeak • Low coupling capacitance • High common mode transient immunity 17295-6 • Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
VOL618A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT Reverse voltage Power dissipation Forward current Forward surge current Junction temperature OUTPUT Collector emitter voltage Emitter collector voltage TEST CONDITION tp < 10 μs Collector current tp/T = 0.
PAGE 3
VOL618A www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION IC/IF IF = 1 mA, VCE = 5 V PART SYMBOL MIN. TYP. MAX. UNIT VOL618A CTR 50 - 600 % VOL618A-2 CTR 63 - 125 % VOL618A-3 CTR 100 - 200 % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TEST CONDITION SYMBOL MIN. TYP. MAX.
PAGE 4
VOL618A www.vishay.com Vishay Semiconductors VIOTM 300 t1, t2 t3 , t4 ttest tstres Phototransistor PSO (mW) 250 200 = 1 s to 10 s =1s = 10 s = 12 s Vpd 150 VIOWM VIORM 100 IR-diode Isi (mA) 50 0 0 0 25 50 75 125 100 t3 ttest t4 150 13930 Tsi - Safety Temperature (°C) tTr = 60 s t1 t2 t stres t Fig. 4 - Derating Diagram Fig.
PAGE 5
VOL618A www.vishay.com Vishay Semiconductors 2.0 NCTR - Normalized CTR (sat) NCTR - Normalized CTR (sat) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 0 20 40 60 VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V 1.8 1.6 1.4 Tamb = -55 °C 1.2 1.0 0.8 0.6 Tamb = 25 °C 0.4 0.2 Tamb = 110 °C 0.0 80 100 120 0.1 10 100 Fig. 13 - Current Transfer Ratio vs. Forward Current (non-saturated) Normalized to 1 mA at 25 °C 1.4 0 1.
PAGE 6
VOL618A www.vishay.com ton, toff Switching Time (μs) 1000 VCE = 5 V, Ic = 2 mA toff (μs) 100 10 ton (μs) 1 0.1 0 5 10 15 20 ton/toff - Turn-On/Turn-Off Time (µs) Vishay Semiconductors 50 Saturated operation VS = 5 V RL = 1 kΩ 40 30 toff 20 10 ton 0 0 RL - Load Resistance (kΩ) Fig. 16 - Switching Time vs. Load Resistance 10 15 20 Fig. 18 - Turn-On/Turn-Off Time vs. Forward Current 0 1.0 RL = 100 Ω -5 20 % used 0.
PAGE 7
VOL618A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) 2.30 max. 4.10 max. 10.20 3.80 + 0.30 - 0.40 0.20 2.00 + 0.10 - 0.05 7.50 ± 0.20 0.10 Seating plane 0.45 ± 0.1 0.70 + 0.30 - 0.40 2.54 nom. 4 3 2.54 Possible footprint 0.90 8.20 1 22533 10.80 technical drawings according to DIN specifications 2 Pin no.
PAGE 8
VOL618A www.vishay.com Vishay Semiconductors SOLDER PROFILE HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 300 255 °C 240 °C 217 °C 250 Temperature (°C) max. 260 °C 245 °C Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s 50 max. ramp up 3 °C/s 0 0 19841 50 100 150 200 250 300 Time (s) Fig.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.