Datasheet

ZMY3V9 to ZMY100
www.vishay.com
Vishay Semiconductors
Rev. 2.0, 12-Mar-2019
1
Document Number: 85788
For technical questions within your region: [e-mail]
, [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Zener Diodes
DESIGN SUPPORT TOOLS AVAILABLE
FEATURES
• Silicon planar power Zener diodes
• For use in stablilizing and clipping circuits with
high power rating
• The Zener voltages are graded according to the
international E 24 standard. Smaller voltage
tolerances are available upon request
• These diodes are also available in the DO-41
case with the type designation ZPY3V9 to ZPY100
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
PARAMETER VALUE UNIT
V
Z
range nom. 3.9 to 100 V
Test current I
ZT
5 to 100 mA
V
Z
specification Pulse current
Circuit configuration Single
3
3
D
D
3
D
3D Models
ORDERING INFORMATION
DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY
ZMY3V9 to ZMY100 ZMY3V9 to ZMY100-series-GS18 5 000 (12 mm tape on 13" reel) 10 000/box
ZMY3V9 to ZMY100 ZMY3V9 to ZMY100-series-GS08 1 500 (12 mm tape on 7" reel) 12 000/box
PACKAGE
PACKAGE NAME WEIGHT
MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING CONDITIONS
MELF (DO-213AB) glass 135 mg UL 94 V-0
MSL level 1
(according J-STD-020)
Peak temperature max. 260 °C
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Power dissipation
Valid provided that electrodes are kept at
ambient temperature
P
tot
1000 mW
Zener current See table “Characteristics”
Junction to ambient air
Valid provided that electrodes are kept at
ambient temperature
R
thJA
170 K/W
Junction to ambient case R
thJC
60 K/W
Junction temperature, maximum
T
j
175 °C
Storage temperature range
T
stg
-55 to +175 °C