Indoor Cycle Owner's Guide

ES700

PREVENTATIVE MAINTENANCE TIPS continued

WEEKLY MAINTENANCE

These procedures are intended to maintain the overall performance of your

ES700 Indoor Cycle:

Have an experienced rider or instructor ride each cycle to review the

overall performance of each cycle; focus on vibrations or possible loose

assemblies. When investigating loose assemblies, parts, bolts or nuts, pay

particular attention to the following areas:

• Tighten all hardware on the base frame

• Tighten all seat hardware

• Tighten pedal connections

• Tighten crank connections

• Tighten water bottle cage connections

• Inspect and tighten brake assembly if needed

• Check to make sure flywheel nuts are tight; tighten as necessary.

• If the belt is slipping, adjust belt tension as necessary.

SPECIAL NOTE: To guard against rust and corrosion, spray a fine layer of

silicone spray on the flywheel and brake assemblies of this bike. Pay

special attention to the chrome surface and hub of the flywheel. We also

advise spraying the silicone on the brake pad to improve its function and

longevity. Do NOT use abrasive cleaning liquids or petroleum-based

solvents on these areas!