Elliptical Trainer User Manual

P I N K B A G
H AR D W A R E I N C L U D E D
500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551
toll free 800.335.4348 • phone [phone] • fax [phone]
www.visionfitness.com
2008 Vision Fitness. All Rights Reserved. 3.08
AG18.52PRD
REV4
A s s e m b l y
G u i d e
X70
COMMERCIAL ELLIPTICAL TRAINERS
B L U E B A G
H A R D W A R E I N C L U D E D
20.5x29x1.5t Wavy
Washer Quantity: 2
X70
COMMERCIAL ELLIPTICAL TRAINERS
To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your
new Elliptical Trainer’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Elliptical Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble your Elliptical Trainer to prevent
loosening and noise. Also, during each assembly step, ensure that ALL bolts and screws are in place and partially threaded in before
completely tightening any ONE bolt or screw.
6mm T-Shaped Wrench
Screwdriver
5mm T-Shaped Wrench
T O O L S & PA RT S IN CL UD ED
P A R T S B O X
Power Cord
Console Mast Bracket
Console Mast Cover
Accessory Tray
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
13mm Wrench
10mm T-Shaped Wrench
17mm
Wrench
8mm L-Shaped Wrench
O R A N G E B A G
M10x70L Socket Head
Cap Screw Quantity: 2
M8x80L Socket Head
Cap Screw Quantity: 1
M8x20L Socket Head Cap
Screw Quantity: 2
M8x10L Socket Head Cap
Screw Quantity: 4
Spacer
Quantity: 4
M8x20L Socket Head Cap
Screw Quantity: 8
M10x50L Hex Socket Head
Cap Screw Quantity: 2
M10x1.25P Nylon
Nut Quantity: 2
B L A C K B A G
M5x12L Socket Head
Cap Screw Quantity: 6
5.3x10x1.0t Washer
Quantity: 4
X70_091111.indd 1 11/11/09 9:11 AM