Manual
VITEK Industrial Video Products
–
Transcendent Series NVRs
95
① Click to extend the group. Click “Add Plate” to pop up the following window.
② Enter the plate, vehicle owner and mobile phone number.
③ Select the vehicle type and group.
④ Enable validity period to set the start and end time
⑤ Finally click “OK” to complete.
Select the added plate and then click to modify its information; click to delete this
plate. The plates can be imported and exported in bulk by clicking “Import and Export”. You can
click “Plate Information Description” to view the detailed information about how to import or
export the plate list.
9.2.3 License Plate Recognition Settings
① In the LPR interface, click the “Recognition” tab. Then enable “Successful Recognition” or
“Strange Plate”.
VITEK Industrial Video Products
–
Transcendent Series NVRs
96
② Set the successful recognition alarm linkage.
l Select one or more plate groups and then choose the schedule. Click “Manage” to set
the schedule.
l Set the text prompt. When the captured plate is matched successfully, the text will
appear on the right of the live view interface.
l Enable alarm output pulse (access control).
l Trigger record, snapshot, alarm-out, buzzer, push, pop-up video, E-mail and pop-up
message box as needed. The alarm linkage settings are similar to the face detection
alarm (See 9.1.1 Face Detection Settings for details).
③ Set the strange plate alarm linkage. When the captured plate picture doesn’t match the plates
in the plate database or their similarity is lower than the set value, the captured plate will be
regarded as a strange plate.
9.3 Tripwire
Tripwire/Line Crossing Configuration:
Alarms will be triggered if the people or vehicles cross the pre-defined alarm line.
① Click StartàSettingsàAI/EventàAI Event àTripwire to go to the following interface.