Manual

VITEK Industrial Vide
o Products
–
Transcendent Series NVRs
105
them, please skip the following instructions.
The setting steps are as follow:
① Enable face detection function (see 9.1.1 Face Detection Settings for details).
② Enable face recognition function and set the alarm linkage items (see 9.1.3 Face Recognition
Settings for details).
③ Go to live view interface and click on a face detection channel. This will bring a toolbar
under the channel. Then click to go to the target detection interface of this channel. In this
interface, you can switch the channel on the top right. You can also click on the top right
corner of the live view interface and then choose the target detection tab to go to the target
detection interface of multi-channel as shown below.
For unknown faces, you can select the face and click under the captured face to register
this face (see the following picture); click to quickly go to the smart face search interface
where you can search the matching face information; click to quickly go to the smart face
playback interface; click to view snapshot details.