Manual

VITEK Industrial Vide
o Products
–
Transcendent Series NVRs
107
Double click the face picture to see the snapshot details, such as snapshot picture, original image,
snapshot time and camera. Click “more” and then a dropdown list will display. Click “Register”
to register the current snapshot. Click “Search” to go to face search interface. Click “Playback”
to go to the playback interface. Click “Export” to export this snapshot details. Click “Information”
to view face ID.
In the face match interface, click “Settings” to pop up the following window.
Target Detection Display: Face, human body and vehicle can be enabled. If disabled, the
captured target picture will not be displayed under the target detection tab in the live view
interface.
Display Strategy: Two options-Comparison priority and only comparison
Video Overlay Display:
VITEK Industrial Vide
o Products
–
Transcendent Series NVRs
108
If “Target box” is clicked, you will see the target traced by a little red box.
If “Rule Line and Area” is checked, you will see the rule line of tripwire detection and detection
area of intrusion detection displayed on the screen. You can select the color of the rule lien and
area as needed.
When the captured face pictures are successfully recognized, click the picture on the right to pop
up a face detail window as shown. In this window, you can see the captured face picture, the
matched picture of face library and the relevant information. You also can view the original
image, search image by snapshot, play back by snapshot and export the face details by clicking
“More” button.
Additionally, you can view the historical captured face pictures and face match information in
the face match interface by clicking “History” tab. Besides registering face pictures in the live
view interface, you can also add target face pictures in the face database interface.
10.1.3 License Plate Detection/Recognition View
Only when the LPR camera is added and enabled, can license plates be captured and matched.
The setting steps are as follows
① Enable the plate detection function (See 9.2.1 License Plate Detection Settings for details).
Then you can see the captured plates displayed in the live view interface as shown below.