Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
3
Record Backup
l Supports recording to be backed up through USB (U disk, mobile HDD) or e-SATA interface
l Supports recording to be backed up by time/event/image searching
l Supports record cutting for backing up when playing back
l Supports a maximum of 10 backup tasks in background and backup status viewing
Event Management
l Supports alarm schedule setting
l Supports enabling or disabling of the motion detection, external sensor alarm input,
combination alarm, intelligence alarm and exception alarms including IP address conflict alarm,
disk IO error alarm, disk full alarm, no disk alarm, illegal access alarm, network disconnection
alarm, IPC offline alarm and so on, alarm linkage configuration supportable
l Supports IPC offline alarm linkage configuration of PTZ, snap, pop-up video, etc.
l Supports event notification modes of alarm-out, pop-up video, pop-up message box, buzzer,
e-mail and so on
l The snapshot images can be attached into the e-mail when alarm linkage is triggered
l Supports alarm status view of alarm-in, alarm-out, motion detection and exception alarm
l Supports alarm to be triggered and cleared manually
l Supports system auto reboot when exception happens
l Supports alarm linkage based on face detection, vehicle detection and license plate
recognition
l Some models support face match alarm
Face Function (available for some models)
l Supports adding 5000 face pictures to the face database (some models support adding
10,000 face pictures to the face database)
l Supports face capture and face match
l Supports image search by image, track playback and database management
l Supports face attendance and face check in
l Supports face information statistics
l Supports face match alarm
LPR Function
l Supports 50,000 license plate registration
l Supports license plate detection, match and search
l Supports vehicle information statistics
l Supports license plate match alarm
Network Functions
l Supports TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol and so on
l Supports black and white list function and the IP address/IP segment/MAC address can be
allowed or blocked.
l Supports multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome (available only
for the versions lower than 45) and Safari in MAC system
l Supports remote achievement, configuration, import and export of the NVR parameters and
other system maintenance operations including remote upgrading and system restart
VITEK Industrial Video Products
–
Transcendent Series NVRs
4
l Supports remote camera configuration of the NVR including video parameters and image
quality.
l Supports remote searching, playback and backup of the NVR
l Supports manual alarm to be triggered and cleared remotely
l An auto-focusing camera can be adjusted through web client (support zoom in/out, but one
key focus is not currently supported)
l Supports NVMS or other platform management software to access the NVR and manage it
l Supports NAT function and QRCode scanning by mobile phones and tablets
l Supports mobile surveillance by phones or tablets with iOS or Android OS
l Supports NVR to be accessed remotely through telnet and the telnet function can be enabled
or disabled
l If one camera recording is enabled or disabled manually through web client, it will be
simultaneously enabled or disabled in the NVR
Other Functions
l The NVR can be controlled and operated by the buttons on the front panel, the remote
controller and the mouse
l Setting interfaces can be switched to one another conveniently by clicking the main menus
on the top of the setting interfaces
l Supports NVR information viewing including basic, camera status, alarm status, record
status, network status, disk and backup status
l Supports factory restoring, import and export of the system configuration, log view and
export and local upgrading by USB mobile device
l Supports auto recognition of the display’s resolution
l You can click the right mouse button at any interface to go back to the upper interface
l You can click the middle mouse button at any interface to go to the live view interface
l The display language and video format of the NVR will not be changed, and the system logs
will be reserved if you reset the NVR to factory default
l Press and hold the right mouse button for 5 seconds in any interface to switch the output to
VGA and the NVR will display the video at the lowest resolution which the NVR supports