Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
145
* If there is a signed certificate, click “Browse” to select it and then click “Install” to install it.
* Click “Create a certificate request” to enter the following interface.
Click “Create” to create the certificate request. Then download the certificate request and submit
it to the trusted certificate authority for signature. After receiving the signed certificate, import
the certificate to the device.
③ After the certificate has been installed, enable this function and apply it. Then the camera can
be accessed by entering https://IP: https port via the web browser (e.g. https://192.168.1.201:443).
Server Port: the default server port of the NVR is 6036. The server port number can be changed
as required. The port is mainly used in network video management system.
POS Port: the default POS port of the NVR is 9036.
API Server: You can log in the media player which supports the RTSP protocol by the
username and password here. Moreover, the third-party can further develop through API
service.
Authentication: Basic authentication and digest authentication are optional.
RTSP Port: RTSP real-time stream protocol can be used to control the sending of real-time
data. By media player (like VLC player) which supports the RTSP real-time stream protocol,
you can view the live images. The default RTSP port is 554 and it can be changed as needed.
(The address format: rtsp://IP address:554/chID=1&streamType=main or rtsp://IP
address:554/chID=1&streamType=sub; main indicators main stream; sub indicators sub
Note: The HTTP port and server port of the NVR should be mapped to the router before you access the
NVR via WAN.