Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
145
* If there is a signed certificate, click “Browse” to select it and then click “Install” to install it.
* Click “Create a certificate request” to enter the following interface.
Click “Create” to create the certificate request. Then download the certificate request and submit
it to the trusted certificate authority for signature. After receiving the signed certificate, import
the certificate to the device.
③ After the certificate has been installed, enable this function and apply it. Then the camera can
be accessed by entering https://IP: https port via the web browser (e.g. https://192.168.1.201:443).
Server Port: the default server port of the NVR is 6036. The server port number can be changed
as required. The port is mainly used in network video management system.
POS Port: the default POS port of the NVR is 9036.
API Server: You can log in the media player which supports the RTSP protocol by the
username and password here. Moreover, the third-party can further develop through API
service.
Authentication: Basic authentication and digest authentication are optional.
RTSP Port: RTSP real-time stream protocol can be used to control the sending of real-time
data. By media player (like VLC player) which supports the RTSP real-time stream protocol,
you can view the live images. The default RTSP port is 554 and it can be changed as needed.
(The address format: rtsp://IP address:554/chID=1&streamType=main or rtsp://IP
address:554/chID=1&streamType=sub; main indicators main stream; sub indicators sub
Note: The HTTP port and server port of the NVR should be mapped to the router before you access the
NVR via WAN.
VITEK Industrial Video Products
–
Transcendent Series NVRs
146
stream; chID indicators channel ID).
Examples: ① Enable RTSP and “Anonymous”. Then open the VLC player and enter the
address (for example: rtsp://192.168.1.88:554/chID=1&streamType=main) in the network
address bar of the VLC player. Then you can view the video of channel 1.
② Enable RTSP and open the VLC player. After that enter the address (for example:
rtsp://192.168.1.88:554/chID=1&streamType=sub) in the network address bar of the VLC
player. Then a login box will pop up. Enter the username and password which should be as the
same as the username and password of API server. Then you can view the video of channel 1.
Note: only some versions may support API server function. Please skip the following
instructions if your DVR does not support it.
13.1.3 PPPoE Configuration
Click StartàSettingsàNetworkàPPPoE to go to the interface as shown below. Check “Enable”
in “PPPoE Settings” and then enter the username and password obtained from the dealer. Click
“Apply” to save the settings.
13.1.4 DDNS Configuration
The DDNS is used to control the dynamic IP address through a domain name. You can access
the NVR easily if the DDNS is enabled and configured.
Click StartàSettingsàNetworkàDDNS to go to the interface as shown below.
Check “Enable” and then select the DDNS type. Enter the server address, domain name,
username and password according to the selected DDNS type. Click “Tes t” to test