Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
7
No. Name Descriptions
3 RS485 Y/Z interface
Connectors for speed dome. Y is TX+, Z is TX-
(This interface of some models is unavailable.)
4 RS485 A/B interface Connect to a keyboard. A is TX+; B is TX-
5 AUDIO OUT Audio output; connect to sound box
6 LAN Network port
7 HDMI Connect to high definition display device
8 USB Connect USB storage device or USB mouse
9 GND Grounding
10 ALARM OUT Relay output; connect to external alarm
11 ALARM IN Alarm inputs for connecting sensors
12 AUDIO IN
Audio input; connect to audio input device, like
microphone, pickup, etc
13 Power Switch Press the switch to turn on/off the NVR
14 Power Supply Power supply interface
No. Name Descriptions
1 VGA Connect to monitor
2 RS485 Y/Z interface
Connect to speed dome. Y is TX+, Z is TX-
(This interface of some models is unavailable.)
3 ALARM OUT Relay output; connect to external alarm
4 GND Grounding
5 AUDIO OUT Audio output
6 e-SATA1 / e -SATA2 Connect to HDD with e-SATA interface
7 LAN1/LAN2 Network port
8 HDMI1 Connect to 4K×2K high definition display device
9 USB3.0/USB
USB3.0 and USB 2.0 interface, connect USB storage
device or USB mouse
10 HDMI2
Connect to 1920×1080 high definition display device.
Connect to monitor as an AUX output channel by
channel. Only video display, no menu show
11 RS485 A/B interface Connect to a keyboard. A is TX+; B is TX-
12 ALARM IN Alarm inputs for connecting sensors