Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
153
② Check SNMPv1or SNMPv2 to enable this function.
③ Set the port of the SNMP.
④ Set the trap address and the trap port.
⑤ Click “Apply” to save the settings.
Trap Address: The IP address of SNMP host.
Trap Port: The port of SNMP host.
Tips: Before setting the SNMP, please download the SNMP software and manage to receive the
device information via SNMP port. By setting the trap address, the device is allowed to send the
alarm event and exception message to the monitoring center.
13.1.12 Cloud Upgrade
Note: Before you use cloud upgrade, please enable NAT2.0.
① Click StartàSettingsàNetworkàCloud Upgrade as shown below.
② Select “Accept Notification Only” or click “Check for Updates” to check whether the current
version is the latest. If your software version is not the latest, click “Upgrade” to download and
VITEK Industrial Video Products
–
Transcendent Series NVRs
154
upgrade from the cloud server.
②
Please do not power down during the upgrade process.
13.1.13 View Network Status
Click StartàSettingsàNetworkàNetwork Status to view the network status or click on
the tool bar at the bottom of the live preview interface to view network status conveniently.
13.2 Basic Configuration
13.2.1 Common Configuration
Click StartàSettingsàSystemàBasicàGeneral Settings to go to the following interface. Set
the device name, device No., language, video format and main output. Enable or disable wizard,
“Log In Automatically”, “Log Out Automatically” (if checked, you can set the wait time), “App
Live Self-Adaption” and “Dwell Automatically” (if checked, you can set the wait time). Click
“Apply” to save the settings.
Device Name: The name of the device. It may display on the client end or VMS that help user to
recognize the device remotely.
Video Format: Two modes: PAL and NTSC. Select the video format according to the camera.