Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
155
Main Output: Enable “Fixed display resolution” and then select the main output as needed.
Note: You can set the resolutions of the main output and secondary output respectively if the
NVR has dual outputs. Refer to the picture as shown below.
Dwell Automatically: Switch automatically. Check it and set “wait time”.The system will switch
images automatically if it is not operated during the time you set.
13.2.2 Date and Time Configuration
Click StartàSettingsàSystemàBasicàDate and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the NVR. The default time zone
is GMT-8 Las Vegas, San Francisco, Vancouver. If the selected time zone includes DST, the DST
of the time zone will be checked by default. Click “Apply” to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual: select “Manual” in the “Synchronous” option and then click after the “System
Time” option to set the system time.
NTP: select “NTP” in the “Synchronous” option and then enter the NTP server.
13.2.3 Recorder OSD Settings
Click StartàSettingsàSystemàBasicàRecorder OSD settings to go to recorder OSD setting
interface. OSD name and icon can be enabled here.
13.3 Factory Default
Click StartàSettingsàSystemàMaintenanceàFactory Default to go to the following interface.
Please choose the item as needed.