Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
155
Main Output: Enable “Fixed display resolution” and then select the main output as needed.
Note: You can set the resolutions of the main output and secondary output respectively if the
NVR has dual outputs. Refer to the picture as shown below.
Dwell Automatically: Switch automatically. Check it and set “wait time”.The system will switch
images automatically if it is not operated during the time you set.
13.2.2 Date and Time Configuration
Click StartàSettingsàSystemàBasicàDate and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the NVR. The default time zone
is GMT-8 Las Vegas, San Francisco, Vancouver. If the selected time zone includes DST, the DST
of the time zone will be checked by default. Click “Apply” to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual: select “Manual” in the “Synchronous” option and then click after the “System
Time” option to set the system time.
NTP: select “NTP” in the “Synchronous” option and then enter the NTP server.
13.2.3 Recorder OSD Settings
Click StartàSettingsàSystemàBasicàRecorder OSD settings to go to recorder OSD setting
interface. OSD name and icon can be enabled here.
13.3 Factory Default
Click StartàSettingsàSystemàMaintenanceàFactory Default to go to the following interface.
Please choose the item as needed.
VITEK Industrial Video Products
–
Transcendent Series NVRs
156
Note: Resetting to the factory default settings will not change time zone.
13.4 Device Software Upgrade
l Upgrade
You can click StartàSettingsàSystemàInformationàBasic to view MCU, kernel version and
firmware version and so on. Before upgrade, please get the upgrade file from your dealer.
The upgrade steps are as follows:
① Copy the upgrade software (.tar) into the USB storage device.
② Insert the USB storage device into the USB interface of the NVR.
③ Click StartàSettingsàSystemàMaintenanceàUpgrade to go to “Upgrade” interface.
Select the USB device in “Device Name” option and go to the path where the upgrade software
exists. Select the upgrade software and then click “Upgrade”. The system may automatically
restart during upgrading. Please wait and do not power off the NVR during upgrading.
l Flash Upgrade
The upgrade steps are as follows:
① Copy the flash upgrade files into the USB storage device.
② Insert the USB storage device into the USB interface of the DVR.
③ Restart the DVR. Then the system will automatically upgrade.
l Cloud Upgrade
① Click StartàSettingsàSystemàMaintenanceàCloud Upgrade to go to “Cloud Upgrade”
interface.
② Enable “Auto-check for updates” to check if the current version is the latest one
automatically. You can also click “Check for updates” to check the version by yourself. If it is
not the latest one, obtain the latest version from the cloud server and then click “Upgrade”. The
system may automatically restart during upgrading. Please wait and do not power off the device
during upgrading.
Note: The file system of the USB mobile device which is used for upgrading, backing up and restoring
should be FAT32 format.