Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
159
14 Remote Surveillance
14.1 Mobile Client Surveillance
① Enable NAT in the NVR. Refer to 13.1.8 N AT Configuration for details.
② Download and install the mobile client “Transcendent viewer” into the mobile device with
a Android or iOS system.
③ Run the mobile client, go to the “Add Device” interface and then click to scan the
QRCode of the NVR (Go to StartàSettingsàSystemàInformationàBasic to view the QRCode
of the NVR).
④ After scanning the QRCode successfully, enter the login password to log in mobile client.
14.2 Web LAN Access
① Click StartàSettingsàNetworkàTCP/IP to go to the “TCP/IP” interface. Set the IP
address, subnet mask, gateway, preferred DNS, and alternate DNS of the NVR.
② Open IE browser on your computer, enter the IP address of the NVR in the address bar and
then press enter to go to the login interface as shown below. You can change the display language
on the top right corner of the login interface. Enter the username and password of the NVR in
the interface and then click “Login” to go to the live preview interface.