Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
163
and the online cameras. For instance, the left number 3 in on the left panel stands
for the number of online cameras; the right number 4 stands for the number of all the added
cameras. Enter the camera name in the search box and then click to search the camera. Click
to refresh the camera list.
l
View Group
Click to view the groups. The top side of the left panel displays all
the groups and the bottom side displays all the cameras in the group.
l View Scheme
Click to view the scheme. All schemes can be shown in the left
panel. Double click the scheme name to display.
Ø Tool Bar Introduction
Button
Meaning
Screen mode button.
Click to disable OSD. Click to enable OSD.
Click to show full screen. Right click on the full screen to exit full
screen.
Click “All Main Stream” or “All Sub Stream” to set the stream of all the
cameras.
Manual alarm button. Click to pop up a window and then trigger and
clear the alarm-out in the window manually.
Click to preview all the cameras.
Click to close all the preview cameras.
Click to start recording for all cameras to computer. Click to stop
recording.
Click to start recording for all cameras to the NVR. Click to stop
recording.
Click to enable talk with the NVR.
Ø Right Panel Introduction
Click on the right panel to show the panel and click to hide the panel. Click
at the bottom of the panel to go to “PTZ” panel. Click to go to
“Operation” panel. Click to go to “Lens Control” panel. Click to
go to “Fisheye” panel.
Click one camera window in the preview area and then click to set the camera’s live
preview stream and record stream to main stream in manual record mode; click to set
the camera’s live preview stream and record stream to sub stream. In sub stream tab, set the
resolution, FPS and bitrate and then click “Apply” to save the settings.
VITEK Industrial Video Products
–
Transcendent Series NVRs
164
Operation panel introduction:
Button Meaning
Click to take a snapshot.
Click to start record to computer
Click to start record to the NVR.
Click to zoom in the image of the camera and then drag the mouse on the
camera image to view the hidden area.
Click to zoom out the image of the camera.
Click to start two-way talk.
The 3D zoom in function is designed for P.T.Z. Click it and then drag the
image to zoom in or zoom out the image; click the image on different areas to
view the image of the dome omni-directionally.
Click to close the preview camera.
Click to display original size
Click to enable audio and then drag the slider bar to adjust the volume. You
can listen to the camera audio by enabling audio.
PTZ panel introduction:
Button Meaning
Click / / / / / / /
to rotate the dome; click to stop rotating the dome.
Drag the slider to adjust the rotating speed of dome.
Click / to zoom in/out camera image.
Click / to increase/ decrease the focal length.
Click / to increase/decrease the iris of the dome.
Click to view the preset list and then click the button in the list to call
the preset.
Click to view the cruise list and then click the corresponding buttons in
the list to start or stop the cruise.
14.4.2 Remote Playback
Click “Playback” in the remote interface to go to the playback interface.
① Check the recording event types and cameras on the left panel. Set the recording date on the
calendar beside the time scale.
② Click to search the recorded data and then click or directly click the
time scale to play the recording.
The operation of the playback time scale is similar to that of the time scale in the main program
of the NVR. Please refer to 8.2 Playback Interface Introduction for details.