Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
9
No. Name Descriptions
2 LAN1/LAN2 Network port
3 HDMI2
Connect to 1920×1080 high definition display device.
Connect to monitor as an AUX output channel by
channel. Only video display, no menu show
4 USB
USB interface, connect USB storage device or USB
mouse
5 HDMI1 Connect to 4K×2K high definition display device
6 VGA Connect to monitor
7 RS485 Y/Z interface
Connect to speed dome. Y is TX+, Z is TX-
(This interface of some models is unavailable.)
8 RS485 A/B interface Connect to keyboard. A is TX+; B is TX-
9 ALARM OUT Relay output; connect to external alarm
10 GND Grounding
11 ALARM IN Alarm inputs for connecting sensors
12 AUDIO IN
Audio input; connect to audio input device, like
microphone, pickup, etc
13 AUDIO OUT Audio output; connect to sound box
14 Power Switch Press the switch to turn on/off the NVR
15 Power Supply Power supply interface
1.4 Connections
l Video Connections
Video Output: Supports VGA/HDMI video output. You can connect to monitor through these
video output interfaces simultaneously or independently.
l Audio Connections
Audio Input: Connect to microphone, pickup, etc.
Audio Output: Connect to headphone, sound box or other audio output devices.
l Alarm Connections
Some models may not support this function. Take 16 CH alarm inputs and 1 CH alarm output for
example.