Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
19
Note:
Ø If you use the NVR with the PoE network ports, the online state of the internal Ethernet port
will be shown on the interface. Refer to the picture below. Please refer to 13.1.1 TCP/IP
Configuration for detail introduction of the internal Ethernet port.
Ø If the NVR has two network ports or above, you can select the network work pattern as
required. Network Fault Tolerance and Multiple Address Setting are available. Refer to the
pictures below. Please refer to 13.1.1 TCP/IP Configuration for more detailed information.